Tobee® Slurry Pump Rubber Cover plate liner B15017-R55 for 2/1.5B Slurry pumps. It is the main wear parts for the rubber lined slurry pump. It forms a pump chamber with cover plate liner and throat bush to contact with slurries, As one of the main wetted parts, Cover plate liner very easily worn-out components because it works under the longtime impact of abrasive and corrosive slurries in high-speed conditions, So the materials are very crucial to a lifetime of the complete pump, Tobee provides a complete rubber materials selection for most all duties in the mill.
Le revêtement en caoutchouc de la plaque de couverture de la pompe à lisier Tobee® est la principale pièce d'usure de la pompe à lisier à revêtement en caoutchouc. Il forme une chambre de pompe avec une doublure de plaque de couverture et une bague de gorge pour entrer en contact avec les boues. En tant que l'une des principales pièces mouillées, la doublure de plaque de couverture s'use très facilement, car elle fonctionne sous l'impact à long terme des boues abrasives et corrosives à grande vitesse. conditions, donc les matériaux sont très cruciaux pour une durée de vie de la pompe complète, Tobee fournit une sélection complète de matériaux en caoutchouc pour la plupart des tâches dans l'usine.
Interchangeable Slurry Pump Rubber Cover Plate Liner Code:
| Cover Plate Liner | Tobee TH Slurry Pump | AH Slurry Pump | Materials |
| B1017 | TH1.5/1B | 1.5/1B-AH | Natural rubber, Synthetic rubber, Polyurethane |
| B15017 | TH2/1.5B | 2/1.5B-AH | Natural rubber, Synthetic rubber, Polyurethane |
| C2017 | TH3/2C | 3/2C-AH | Natural rubber, Synthetic rubber, Polyurethane |
| D3017 | TH4/3C, 4/3D | 4/3C-AH, 4/3D-AH | Natural rubber, Synthetic rubber, Polyurethane |
| E4018 | TH6/4D, 6/4E | 6/4D-AH, 6/4E-AH | Natural rubber, Synthetic rubber, Polyurethane |
| F6018 | TH8/6E, TH8/6F, TH8/6R | 8/6E-AH, 8/6F-AH, 8/6R-AH | Natural rubber, Synthetic rubber, Polyurethane |
| F8018 | TH10/8F | 10/8F-AH | Natural rubber, Synthetic rubber, Polyurethane |
| G8018 | TH10/8ST | 10/8ST-AH | Natural rubber, Synthetic rubber, Polyurethane |
| FAM10018 | TH12/10F | 12/10F-AH | Natural rubber, Synthetic rubber, Polyurethane |
| G10018 | TH12/10ST | 12/10ST-AH | Natural rubber, Synthetic rubber, Polyurethane |
| FAM12018 | TH14/12F | 14/12F-AH | Natural rubber, Synthetic rubber, Polyurethane |
| G12018 | TH14/12ST | 14/12ST-AH | Natural rubber, Synthetic rubber, Polyurethane |
| H14018 | TH16/14TU | 16/14TU-AH | Natural rubber, Synthetic rubber, Polyurethane |
| U18018 | TH20/18TU | 20/18TU-AH | |
| Impeller Code | Tobee TL Slurry Pump | L Slurry Pump | Materials |
| RSL30018 | TL300S | 300S-L | Natural rubber, Synthetic rubber |
| S35018 | TL350S | 350S-L | Natural rubber, Synthetic rubber |
| TL40018 | TL400ST | 400ST-L | Natural rubber, Synthetic rubber |
| TL45018 | TL450ST | 450ST-L | Natural rubber, Synthetic rubber |
| Impeller Code | Tobee TM Slurry Pump | M Slurry Pump | Materials |
| F8018 | TM10/8E, TM10/8F, TM10/8R | 10/8E-M, 10/8F-M, 10/8R-M | Natural rubber, Synthetic rubber, Polyurethane |
| F10018 | TM12/10F, TM12/10R | 12/10F-M, 12/10R-M | Natural rubber, Synthetic rubber, Polyurethane |
Tobee® Slurry Pump Materials Description and Performance:
| Code |
Description |
Hardness |
Performance |
Applications |
|
T05 |
27% High chrome alloy |
HRC≥60 |
Erosion resistance is marginally lower than T07 and has corrosion resistance. |
Used for high wear applications with a slurry pH between 5 and 12. |
|
T07 |
15% High chrome alloy |
HRC≥62 |
Excellent erosion resistance and has higher wear resistance than T05 |
Mining pumps ideal for high impact and high pressure applications, such as pumping slurries with sharp, hard, and coarse solids at high flow rate. |
|
T12 |
30% Ultra chrome alloy |
HRC≥65 |
With abrasion resistance better than T05 and T07. |
Suitable for highly abrasive pumping applications. |
|
T33 |
35% Hyper chrome alloy |
HRC=35 |
This material has erosive and corrosive resistance in low pH applications. Its abrasion resistance is higher than that of M49. |
The material can be used to transport oxygenated slurries with pH of not less than 1 such as phosphor-plaster, nitric acid, vitriol, phosphate etc |
|
T49 |
29% High chrome alloy |
HRC=43 |
With a certain degree of scour resistance and good corrosion resistance under low pH conditions. Its abrasion resistance is higher than T05. |
Particularly suitable for use in flue gas desulphurization as well as mild acid applications with pH value no less than 4. |
|
RU26 |
Natural Rubber |
Shore(A)=40-55 |
High resistance to abrasion and corrosion |
An optimal choice for conveying acid slurry and slurry with fine granular particles at ambient temperature. |
|
SY45 |
Butyl Rubber |
Shore(A)=60 |
Resistance to corrosion, abrasion, and high temperature |
Ideal for transporting acid slurry and slurry with fine solid particles at temperatures between 60℃ and120℃. |
|
SY31 |
Hypalon Rubber |
Ultra-high resistance to corrosion and high temperature |
Suitable for pumping strong acids and alkalis with temperatures above 100℃. |
|
|
PU01 |
Polyurethane |
Shore A10-D80 |
PU01 is an erosion resistant material that performs well in elastomer applications where 'tramp' is a problem. |
Suitable for pumping high abrasion with high corrosion medium. |
Added to subscribe successful !
