Vertical spindle slurry pump

Tobee Vertical spindle slurry pumps are select the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance, and where
larger particles or high density slurries are encountered.
For the SP/SPR vertical slurry pump, The inlet is oriented vertically and downward on one side of the vertical pump, and the outlet is oriented vertically and upward on the other side. It composed of the lower filter platform, pump body,
impeller, shaft, guard plate, and bracket. The upper part of the SP/SPR pump is supported by bearings; the pump is installed under the liquid, and no shaft seal is used. It uses a belt drive (BD) and direct drive (CD) transmission type.
The depth of the immersion liquid in the standard size range can be adjusted according to the needs of the user.

Tobee® Vertical spindle slurry pump  Features:

Impellers – Unique double suction impellers; fluid flow enters the top as well as the bottom. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable.

Bearing Assembly – The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is
a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.

Casing – Has a simple bolt-on attachment to the base of the column. The metal vertical pumps have a heavy walled abrasive resistant high chrome alloy casing. Rubber vertical pumps have a molded rubber casing adhered to sturdy metal
structures.

Upper Strainer - Drop-in metal mesh, snap-on elastomer or polyurethane. Strainers fit in column openings which prevent overly large particles and unwanted refuse from entering casing of the pump.

Lower Strainer - Bolted metal or polyurethane for the metal pump, moulded snap-on elastomer for rubber pump, which protect the pump from oversize particles.

Tobee® Vertical spindle slurry pump applications:

Tobee vertical spindle pumps can be used for gravel and sand, mineral processing, chemical processing, coal preparation, effluent handling, floor sump pumping, mill scale pumping, pumping of machine tool cuttings and almost every other
tank, floating dewatering or other floating pump platforms.