Submersible Coal Mud and Sludge Pump for Extraction of Coal on Mine

Hydroman^® Submersible Coal Mud and Sludge Pump Description:

Hydroman^® Submersible Coal Mud and Sludge Pump is a type of dredging equipment that used on a series dredger to suck up the sediment and deposit it into a holding tank or onto a conveyor belt that moves it to its final destination. Hydroman®  Submersible Dredging Unloading Pump or submersible offshore dredging sand pump have been extensively used in beach reclamation / beach nourishments projects, harbors & marinas, removing silt and other sediments from the bottom of a river or water source, environmental clean-up projects or to restore rivers and wetlands.

Hydroman^® Submersible Coal Mud and Sludge Pump Advantage:

▪ The motor of submersible slurry sand pump is made in all-copper core wire with stable speed and long service life.
▪ Hydroman^® submersible dredging slurry pump with thickened pump body is more wear-resistant,our submersible slurry pump weight is twice that of other suppliers.
▪ Submersible dredging agiator pump installed in unique double mechnical seal effectively prevents impurities from entering the inner cavity.
▪ Submersible muddy water agitator pump has double shaft seal for high-strength seal without leakage.
▪ Hydroman^® submersible sand pump is equipped with the motor with low speed, high number of motor stages, large torque, safer for high-power loads.

Hydroman^® Submersible Coal Mud and Sludge Pump Structural Drawing:

Hydroman^® Submersible Coal Mud and Sludge Pump Using Method and Precautions:

▪ Before the using submersible drainage mud pump, please carefully check whether the submersible cable is damaged, whether the fasteners are loose or fall off, and whether the submersible mud pump is deformed or damaged during transportation, storage and installation.
▪ Use a 500V megohmmeter to measure the insulation resistance between the same and relative grounds of the electric slurry pump motor. The value should not be lower than 2 megohms. Otherwise, the stator winding of the motor should be dried,and the temperature of the drying treatment should not exceed 120°C.
▪ The rotation direction is counterclockwise from the water inlet after the submersible industrial effluents sewage pump is turned on, if the electric submersible waste water sludge pump is reversed, submersible sludge pump only needs to exchange any two wires in the cable and adjust the wiring position.
▪ The ground wire of the casing of the electric submersible sand pump must be connected in strict accordance with the relevant regulations. In order to ensure personal safety during use of the electric submersible mud pump, when the electric submersible dredging pump is running,it is strictly forbidden to install people nearby to do things or move in the water, just in case the electric pump accidents due to electric leakage.
▪ Submersible ground pump must be equipped with automatic pump control without special circumstances, and it must not be directly connected to the power grid.
▪ Slurry submersible pump without cooling jacket is strictly forbidden to run for a long time above the water surface as a whole to prevent the electric submersibel sandy slurry pump from being damaged by overheating.

Hydroman^® Submersible Coal Mud and Sludge Pump Application:

Removal of silt build up at marinas, harbors, dock loading facilities, etc. / Waste sludge handling / Tank clean out / Waste collection ponds / Dredging deep deposits (up to 120 m deep) / Sands mining / Barge unloading / Waste collection pit / Ash sumps / Dredging waste ponds / Clean up sumps / Gold tailings reclamation / Settling and collection ponds / Underground slimes collection ponds / Conveyor tunnel sumps / Coal tailings relocation / Crusher sumps / Grinding area sumps / Flotation area sumps / / Truck wash sumps / Mill scale pits / Coke plant scale pit / Blast furnace slag pit / Water treatment sumps / Clean out caissons in construction / Transfer of bentonite slurry / Overburden removal / Reclaiming beaches / River, lake and canal clean out.

Contact us:

Email: Sales10@tobeepump.com | Mob: +86-18132668739 | Skype: Tobee.Pump | Fax: +86 311-87221317
Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn  | Web: www.tobee.store