Tobee® Slurry Pump Shaft Sleeve D076 is a long type parts, it is also called quick - wear part, the shaft sleeve can be installed on 4x3D-AH Slurry Pumps and 6x4D-AH Slurry Pumps.
The design and material of shaft sleeve is significant to slurry pump work-life, The slurry pump shaft sleeve protects pump shaft from abrasion and corrosion within seal arrangements.
Slurry Pump Shaft Sleeve Parts are cylindrical metal tubes in the wet ends of slurry pumps used to protect vulnerable areas of pump shafts. Sleeves most commonly protect shafts from packing wear at the stuffing box. By design, renewable sleeves already protect pump shafts from erosion, corrosion, and wear at leakage joints and seal chambers. But shaft sleeves, in particular, can provide extra protection and are much more cost-efficient to replace than shafts. For example, a sleeve can protect the shaft from coming in contact with pumping fluid while providing a cushion easier and far less expensive to replace than the shaft itself.
To avoid early replacement, shaft sleeve for slurry pumps best maintenance practices involve regularly inspecting slurry pumps for unusual vibration or wear and establishing a routine maintenance schedule. As specified in your slurry pump user manual, you should replace oil quarterly. At this time, routine maintenance should include removing shaft sleeves to check for wear and repacking the stuffing box. The safest and most efficient way to remove the shaft sleeve is by using a shaft sleeve lifting device.
Tobee® Slurry Pump Shaft Sleeve Code List:
|
Shaft Sleeve Code |
AH Slurry Pump |
Shaft Sleeve Materials |
|
B075 |
1.5/1B-AH, 2/1.5B-AH |
SS420, SS304, SS316L, Ceramic |
|
3/2C-AH, 4/3C-AH |
SS420, SS304, SS316L, Ceramic |
|
|
4/3D-AH, 6/4D-AH |
SS420, SS304, SS316L, Ceramic |
|
|
6/4E-AH, 8/6E-AH, 8/6R-AH |
SS420, SS304, SS316L, Ceramic |
|
|
F075 |
8/6F-AH |
SS420, SS304, SS316L, Ceramic |
|
10/8F-AH, 12/10F-AH, 14/12F-AH |
SS420, SS304, SS316L, Ceramic |
|
|
10/8ST-AH, 12/10ST-AH, 14/12ST-AH |
SS420, SS304, SS316L, Ceramic |
|
|
TH075 |
16/14TU-AH |
SS420, SS304, SS316L, Ceramic |
|
16/14TU-AH |
SS420, SS304, SS316L, Ceramic |
|
|
Shaft Sleeve Code |
HH Slurry Pump |
Shaft Sleeve Materials |
|
CH075 |
1.5/1C-HH |
SS420, SS304, SS316L, Ceramic |
|
3/2D-HH |
SS420, SS304, SS316L, Ceramic |
|
|
4/3E-HH |
SS420, SS304, SS316L, Ceramic |
|
|
F075 |
6/4F-HH |
SS420, SS304, SS316L, Ceramic |
|
Shaft Sleeve Code |
M Slurry Pump |
Shaft Sleeve Materials |
|
10/8E-M |
SS420, SS304, SS316L, Ceramic |
|
|
F075 |
10/8F-M |
SS420, SS304, SS316L, Ceramic |
|
Shaft Sleeve Code |
L Slurry Pump |
Shaft Sleeve Materials |
|
A075 |
20A-L |
SS420, SS304, SS316L, Ceramic |
|
BSC075 |
50B-L |
SS420, SS304, SS316L, Ceramic |
|
75C-L |
SS420, SS304, SS316L, Ceramic |
|
|
100D-L |
SS420, SS304, SS316L, Ceramic |
|
|
150E-L |
SS420, SS304, SS316L, Ceramic |
|
|
S075 |
300S-L |
SS420, SS304, SS316L, Ceramic |
|
Shaft Sleeve Code |
G(H) Gravel Pump |
Shaft Sleeve Materials |
|
6/4D-G |
SS420, SS304, SS316L, Ceramic |
|
|
8/6E-G |
SS420, SS304, SS316L, Ceramic |
|
|
F075 |
10/8F-G |
SS420, SS304, SS316L, Ceramic |
|
G075 |
12/10G-G, 14/12G-G, 12/10G-GH |
SS420, SS304, SS316L, Ceramic |
|
TH075 |
14/12TU-G,16/14TU-G,16/14TU-GH |
SS420, SS304, SS316L, Ceramic |
|
14/12TU-G, 16/14TU-G, 16/14TU-GH |
SS420, SS304, SS316L, Ceramic |
Added to subscribe successful !
