Rubber Lined Vertical Pump 100RV-SPR Price

100RV-SPR Rubber Vertical Slurry Pump Parts including No.: SPR10206AR55, SPR10092R55, SPR10041R55, etc.

Metal Model: 40PV-SP, 65QV-SP, 100RV-SP, 150SV-SP, 200SV-SP, 250TV-SP, 300TV-SP

Submerged depth: E 900mm, G 1200mm, J 1500mm, L 1800m, M 2000m, Q 2400mm

Wet End parts:
Pump Impeller: SP40206A05, SP65206A05, SP10206A05, SP15206A05, SP20206A05, SP25206A05, SP30206A05
Pump Casing: SP40092A05, SP65092A05, SP10092A05, SP15092A05, SP20092A05, SP25092A05, SP30092A05
Pump Back Liner: SP40041A05, SP65041A05, SP10041A05, SP15041A05, SP20041A05, SP25041A05, SP30041A05

Rubber Model: 40PV-SPR, 65QV-SPR, 100RV-SPR, 150SV-SPR, 200SV-SPR, 250TV-SPR, 300TV-SPR

Wet End parts:

Pump Impeller: SPR40206, SPR65206,SPR10206, SPR15206, SPR20206, SPR25206, SPR30206
Pump Casing: SPR40092, SPR65092, SPR10092, SPR15092, SPR20092, SPR25092, SPR30092
Pump Back Liner: SPR40041, SPR65041, SPR10041, SPR15041, SPR20041, SPR25041, SPR30041
Impeller O-ring: RV064-S10,  Discharge Pipe Gasket: SP10204, Rubber Back Liner Seal: E4124S01
RV004-1

100RV-SP Rubber Lined Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.

Vertical Slurry Pumps Design Features:

Impellers – Unique double suction impellers; fluid flow enters the top as well as the bottom. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable.
Bearing Assembly – The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Casing – Has a simple bolt-on attachment to the base of the column. The metal vertical pumps have a heavy walled abrasive resistant high chrome alloy casing. Rubber vertical pumps have a molded rubber casing adhered to sturdy metal structures.
Upper Strainer - Drop-in metal mesh, snap-on elastomer or polyurethane. Strainers fit in column openings which prevent overly large particles and unwanted refuse from entering casing of the pump.
Lower Strainer - Bolted metal or polyurethane for the metal pump, moulded snap-on elastomer for rubber pump, which protect the pump from oversize particles.

Installation:

Mounting the vertical pumps as simple as four through-bolts on the pump mounting plate. The motor is fully supported on the pump base itself, and can be oriented in either a shaft-up or shaft-down position depending on customer preference and space availability.

Applications:

Tobee vertical spindle pumps can be used for gravel and sand, mineral processing, chemical processing, coal preparation, effluent handling, floor sump pumping, mill scale pumping, pumping of machine tool cuttings and almost every other tank, floating dewatering or other floating pump platforms.

100RV-SPR Rubber Vertical Slurry Pump Performance Parameters: