Tobee® Pump is always making continuous optimization of materials like Cast steel, EPDM, Hypalon, Hastelloy, CD4MCu, Viton, Fluoroplastic, Ceramic, Bronze, Titanium, Aluminum and other anti-abrasive & corrosive materials for various applications, Such as impeller: EN-GJL 250, 1.4460 and 1.4517, casing/casing cover: EN-GJL 250 and 1.4460, volute casing: EN-GJL 250, EN-GJS-400-15 and 1.4460, bearing housing EN-GJL 250 and 1.4468, front and rear lining: 1.4460 and 1.4517, stuffing box body EN-GJL 250, 1.4460 and 1.4408, shaft: 1.4021 & 1.4462 and 1.4404 & 1.4439, etc.
ANDRITZ ACP and S series Pump benefits:
Maximum efficiency of up to 90%
State-of-the-art NPSH behavior
Part load behavior better than industry benchmark
Reduced number of spare parts to be held in stock
The modular system of ANDRITZ end-suction centrifugal pumps only needs 5 bearing support sizes.
• Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration.
• Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation.
• Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc
• Shaft seal - Mechanical seals and packing seal can be used as per requested
• Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
Tobee™ Andritz Pump Spare Parts Design Features:
Bearing assembly--A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners--Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
Casing--Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller--front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Throatbush--Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Added to subscribe successful !
