OEM Andritz Paper Stock Mills Centrifugal Pumps Factory

Tobee® manufacture Andritz ACP paper stock pumps and pump spares: ACP 65-315, ACP 100-500, ACP 65-250, ACP 100-315, ACP 125-400, ACP 150-500, ACP 100-250, ACP 125-315, ACP 150-400, ACP 200-500, ACP 300-700, ACP 125-250, ACP 150-315, ACP 200-400, ACP 400-700, ACP 250-315, ACP 300-400, ACP 450-550, ACP 600-700 etc.

Available Andritz S Paper Pump Models and Spares:S80-265, S100-265, S125-265, S3 100-350.3, S125-350, S150-330, S3 125-400, S3 150-400.3, S3 200-380, S8 200-380, S3 150-470.3, S3 200-470.3, S3 250-430.3, S3 350-470.3, S8 350-470.6, S500-600, etc

ANDRITZ ACP and S series Pump Specifications:
Design:single-stage, single-flow, open and semi-open impeller
Consistency:up to 8%
Head:10-180 m
Flow rate:up to 8,000 m3/h
Pressure:up to 40 bar
Temperature:up to 200℃
Efficiency:up to 90%

ACP Centrifugal Pump Design:
Impeller(230)
• Accelerating the medium by charging it with energy.
• Semi-open impeller with vanes on the back.
Spiral casing (102)
• Guiding the medium with a favorable flow pattern, converting speed energy into pressure energy.
• Pressure-sealed pump casing with delivery and suction channels.
• Suction and delivery flange.
• Holds the bearing housing with bearing assembly, shaft and impeller.
Pump shaft (211)
• Holding the impeller, shaft seal, bearing assembly and coupling.
• Transmitting the drive energy to the impeller and thus, to the medium.
• Sturdily dimensioned drive shaft.
Bearings
• Interface between stationary and rotating parts. Absorption of axial and radial forces.
• Impeller side: Two angular contact ball bearings (321.1) with steel cage.
• Drive side: One deep groove ball bearings (321.2) with steel cage.
Shaft seal 
Depending on operating requirements, there is a choice of eight different shaft seals:
• Cartridge mechanical seal - single
• Cartridge mechanical seal - double
• Standard cartridge mechanical seal - single
• Standard cartridge mechanical seal – double
• Single standard mechanical seal
• Tandem mechanical seal
• Stuffing box packing
• Dynamic shaft seal

Tobee™ Andritz Pump Spare Parts Design Features:
Bearing assembly--A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners--Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
Casing--Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller--front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Throatbush--Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.