Mission Magnum TSBV 6x5x11 Vertical Centrifugal Sand Pump

Mission Magnum TSBV 6x5x11 Vertical Centrifugal Sand Pump used for mud, drilling, diesel.

Sandman™ TSBV series Mission Magnum Vertical Centrifugal Pump is a single stage vertically mounted centrifugal pump, offers ease of maintenance as well as a small footprint in areas with limited floor space, the pump shaft directly connect the electric motor, there no need to install the bearings and mechanical seal, the concentric casing design minimizes shaft cyclical deflection and allows excellent slurry handling.

Design Features:

• The TSBV series concentric pump housings are heavier and stronger to outlast conventional pumps. The housings are thicker for extra strength and extended service life. The concentric design allows the distance between the impeller and the housing to be the same at all points. The concentric housing eliminates turbulence and cavitation within the pump. It also reduces the radial load on the bearings. The full pipe diameter of the pump entrance. The housing gasket is recessed to protect it from fluid leaving the impeller.
• The TSBV series open-vane impeller eliminates recirculation that occurs in closed impellers. The impeller is designed to reduce turbulence, lower radial and thrust loads, and provides a smooth flow of fluid through the pump. Housing wear is reduced by eliminating the high scrubbing action that occurs on conventional pumps. The SB240 series impeller is designed to allow fluid leaving the impeller to blend with recirculating fluid to reduce abrasive wear of the casing. The open-vane impeller has no exposed impeller nuts or shaft threads. The impeller is screwed on and the threads are protected by ano-ring. The SB240 series pump and impeller are designed to increase service life many times over that of conventional pumps.
• The TSBV series shaft has a greater diameter to provide heavy-duty performance with minimal shaft deflection. The replaceable shaft sleeve allows the wear from the packing to be renewed without replacing the entire shaft. The shaft sleeve and mechanical seal can be replaced 4without removing the shaft from the pump
• The TSBV series bearings are designed for easy maintenance. The outboard bearing assembly is comprised of two angular contact bearings with high thrust load ratings and zero end play. The inboard bearing is a heavy-duty, double row ball bearing with high radial load capacity to compensate for the larger impeller sizes and heavy-duty applications. The SB240 series only uses the best bearings available.

Tobee^® TSBV Mission Magnum Sand Pumps Application:

• Desanding and desilting
• Degassing
• Supercharging
• Centrifugal feed
• Mud cooling towers
• Wash-down
• Chemical, refinery, industrial, construction and agricultural applications
• Underground Construction