Casing, 4x3x13 w/wear pad H19205-01-30A is used for Mission 2500 Supreme Pump.
The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Fluid end parts available with Supreme Hard material that has a 400 Brinell hardness. The standard impeller, casing wear pad and stuffing box are Ductile Iron to ensure even wear characteristics.
Casing provided with replaceable casing wear pad on 4x3x13 – 10x8x14 models.
Design Features:
• Versatile stuffing box
• Thick, strong, concentric casing with replaceable casing wear pad
• Casing gasket receded for protection.
• Replaceable stuffing box cover with dual stuffing box bolts
• Long-life, no-adjustment mechanical seal available for near zero leakage
• Replaceable shaft sleeve
• Solid Frame base
• Labyrinth seals for maximum bearing protection
• Duplex angular contact bearings
• Full pipe diameter entrance for minimum turbulence and maximum efficiency
• Wide semi-open impeller creates lower axial thrust for improved bearing life
• All sizes feature the same power end
Mission 2500 Supreme Pump Casing and Impellers Codes:
|
CASINGS - including studs, nuts and gaskets |
|||||
|
Item |
Qty |
Part No. |
Processing# |
Description |
Material |
|
1* |
1 |
H19203-01-30A |
19203AH |
Casing,3×2×13 |
Hard iron |
|
1* |
1 |
19205AH |
Casing,4×3×13, w/wear pad |
Hard iron |
|
|
1* |
1 |
H19222-01-30A |
19222AH |
Casing,5×4×14, w/wear pad |
Hard iron |
|
1* |
1 |
H19122-01-30A |
19122AH |
Casing,6×5×11, w/wear pad |
Hard iron |
|
1* |
1 |
H19123-01-30A |
19123AH |
Casing, 6×5×14, w/wear pad |
Hard iron |
|
1* |
1 |
H19763-01-30A |
19763AH |
Casing, 8×6×11, w/wear pad |
Hard iron |
|
1* |
1 |
H19117-01-30A |
19117AH |
Casing,8×6×14, w/wear pad |
Hard iron |
|
1* |
1 |
H20937-01-30A |
20937AH |
Casing,10×8×14, w/wear pad |
Hard iron |
|
IMPELLERS and CASING WEAR PADS |
|||||
|
Item |
Qty |
Part No. |
Processing# |
Description |
Material |
|
2* |
1 |
H19204-XX-30 |
Varies |
Impeller,3×2×13 Open |
Ductile Hard iron |
|
2* |
1 |
H19206-XX-30 |
Varies |
Impeller,4×3×13 Open |
Ductile Hard iron |
|
2* |
1 |
H2523--XX-30 |
Varies |
Impeller,5×4×14 Semi Open |
Ductile Hard iron |
|
2* |
1 |
H2524-XX-30 |
Varies |
Impeller,6×5×11 Semi Open |
Ductile Hard iron |
|
2* |
1 |
H2524-XX-30 |
Varies |
Impeller, 6×5×14 Semi Open |
Ductile Hard iron |
|
2* |
1 |
H2524-XX-30 |
Varies |
Impeller, 8×6×11 Semi Open |
Ductile Hard iron |
|
2* |
1 |
H2525-A0-30 |
Varies |
Impeller,8×6×14 Semi Open |
Ductile Hard iron |
|
2* |
1 |
H2526-XX-30 |
Varies |
Impeller,10×8×14 Semi Open |
Ductile Hard iron |
|
1E |
1 |
H2501-01-30A |
2501-37AH |
Wear Pad, 4x3x13 Casing |
Ductile Hard iron |
|
1E |
1 |
H2502-01-30A |
2502-37AH |
Wear Pad, 5x4x14 Casing |
Ductile Hard iron |
|
1E |
1 |
H2503-01-30A |
2503-37AH |
Wear Pad, 6x5x11 Casing |
Ductile Hard iron |
|
1E |
1 |
H2504-01-30A |
2504-37AH |
Wear Pad, 6x5x14 Casing |
Ductile Hard iron |
|
1E |
1 |
H2505-01-30A |
2505-37AH |
Wear Pad, 8x6x11 Casing |
Ductile Hard iron |
|
1E |
1 |
H2506-01-30A |
2506-37AH |
Wear Pad, 8x6x14 Casing |
Ductile Hard iron |
|
1E |
1 |
H2527-01-30A |
2527-37AH |
Wear Pad, 10x8x14 Casing |
Ductile Hard iron |
|
Remarks |
|||||
|
1. XX-Impeller code-First X equals dia.of impeller in inches minus 4.Therefore 10"=6,9"=5, etc…14"use letter A; |
|||||
Added to subscribe successful !
