Tobee® Throat Bush H14083RE1A05 is one of wetted parts for the 16/14 AH Slurry Pump, It links plate liner and forms a Pump chamber to work with impeller, and Its wear-resistance is very important to pump work-life.
Centrifugal Slurry Pump Parts are an unavoidable cost associated with operating centrifugal slurry pumps, the primary slurry pump parts included impeller, volute liner, frame plate liner insert, throat bush and bearing assembly etc., TOBEE® provides replacement parts for Warman pump spare parts and stock a range of slurry pump wetted end parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc.
The Main Parts for Centrifugal Slurry Pump Parts:
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
• Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
• Impeller - front and rear shrouds have pump out vanes that reduce re-circulation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Throat bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
16/14 AH Slurry Pump Components Drawing:
Tobee® 16/14 AH Slurry Pump Materials Description and Performance:
|
Code |
Description |
Hardness |
Performance |
Applications |
|
T05 |
27% High chrome alloy |
HRC≥60 |
Erosion resistance is marginally lower than T07 and has corrosion resistance. |
Used for high wear applications with a slurry pH between 5 and 12. |
|
T07 |
15% High chrome alloy |
HRC≥62 |
Excellent erosion resistance and has higher wear resistance than T05 |
Mining pumps ideal for high impact and high pressure applications, such as pumping slurries with sharp, hard, and coarse solids at high flow rate. |
|
T12 |
30% Ultra chrome alloy |
HRC≥65 |
With abrasion resistance better than T05 and T07. |
Suitable for highly abrasive pumping applications. |
|
T33 |
35% Hyper chrome alloy |
HRC=35 |
This material has erosive and corrosive resistance in low pH applications. Its abrasion resistance is higher than that of M49. |
The material can be used to transport oxygenated slurries with pH of not less than 1 such as phosphor-plaster, nitric acid, vitriol, phosphate etc |
|
T49 |
29% High chrome alloy |
HRC=43 |
With a certain degree of scour resistance and good corrosion resistance under low pH conditions. Its abrasion resistance is higher than T05. |
Particularly suitable for use in flue gas desulphurization as well as mild acid applications with pH value no less than 4. |
|
RU26 |
Natural Rubber |
Shore(A)=40-55 |
High resistance to abrasion and corrosion |
An optimal choice for conveying acid slurry and slurry with fine granular particles at ambient temperature. |
|
SY45 |
Butyl Rubber |
Shore(A)=60 |
Resistance to corrosion, abrasion, and high temperature |
Ideal for transporting acid slurry and slurry with fine solid particles at temperatures between 60℃ and120℃. |
|
SY31 |
Hypalon Rubber |
|
Ultra-high resistance to corrosion and high temperature |
Suitable for pumping strong acids and alkalis with temperatures above 100℃. |
|
PU01 |
Polyurethane |
Shore A10-D80 |
PU01 is an erosion resistant material that performs well in elastomer applications where 'tramp' is a problem. |
Suitable for pumping high abrasion with high corrosion medium. |
Tobee® Slurry Pump Parts widely used in Mining, Mineral Processing, Paper pulp, Sands, Gravels, Dredging, Coal Prep, Cyclone Feeds, Chemical Slurry Service, Tailings, Aggregate Processing, Ash Handling, Fine Primary Mill Grinding, Secondary Grinding, Iron Ore, Cooper, Oil field, Diamond, Alumina, Coal, Gold, Silver, Cement, Lead&zinc, Asbestos, Kaolin, Phosphorite, Bauxite, Potash, Mineral sands, Steel, Palm, Sugar, Steeloxyde, Chemical fertilizer, Molybdenum, Tin, Titanium, Power, FGD, Sea water, Food Processing, Cracking Operations, Pipeline Transport, High Velocity Hydraulic Transport,Food Processing, Explosive Sludge In Metal Smelting, River And Pond, Heavy Refuse Removal, Continuous (Snore) Sump Pump Operation, Abrasive Slurries, High Density Slurries, Large Particle Slurries, Sump Drainage, Wash down, Floor Drainage, Mixing, Frac Sand Blending, Tobacco, Construction, City Sewage, Industrial Processing etc.
Added to subscribe successful !
