16/14 AH Slurry Pump Wetted Parts Including the High Chrome Impeller, Volute Liner, Throatbush and Frame Plate Liner Insert.
Tobee® is committed to improvement of slurry pump wear parts continues with the introduction of the Hyperchrome alloy material. Slurry pump wear parts have direct connection with slurry, are very crucial to the service life of slurry pumps. The slurry pump wear parts include slurry pump impeller, slurry pump liners, slurry pump throatbush, slurry pump frame plate liner insert, slurry pump casing etc, They are very easily worn-out components because the wear parts work under longtime impact of abrasive and corrosive slurries in the high speed. For the long service life of slurry pump wear parts, the material plays an important role here.
Slurry Pump Wear Parts Benefits
• Increased wear life – Tobee slurry pump wear parts is designed to increase wear life between 30% and 50%
• Power savings – lower pump power consumption
• Cost reduction – higher pump efficiency sustained over a longer pumping operation time
• Retrofit – new high abrasion resistance slurry pump wear parts retrofit to your current slurry pumps
• Lower NPSH requirements – results in enhanced hydraulic performance and extended wear life
• Material combinations – rubber or metal part combinations available
Slurry Pump Spare Parts:
Basic Spare Number |
Description |
Basic Spare Number |
Description |
001 |
Adjusting Screw |
080 |
Stepped Washer |
003 |
081 |
Keeper Plate |
|
004 |
Bearing Housing |
083 |
|
005 |
085 |
Throatbush Cotter |
|
008 |
Bearing Sleeve |
089 |
Bearing Seal |
009 |
090 |
Shaft Seal |
|
011 |
Clamp Washer |
092 |
Sump Pump Casing |
012 |
Clamp Bolt |
102 |
Sump Pump Column |
013 |
108 |
Piston Ring |
|
015 |
Cover Plate Bolt |
109 |
Shaft Sleeve O-Ring |
017 |
Cover Plate Liner |
110 |
|
018 |
111 |
||
019 |
Sump Pump Mounting Plate |
112 |
Throatbush |
021 |
Impeller – Two Vanes Open |
114 |
Impeller – Six Vanes Open |
023 |
Cover Plate Liner Stud |
116 |
Sump Pump Strainer |
024 |
End Cover |
117 |
|
025 |
End Cover Shim |
118 |
Lantern Restrictor |
026 |
Frame Plate Liner Stud |
122 |
Seal Ring |
027 |
End Cover Set Screw |
124 |
Volute Cover Seal |
028 |
125 |
Volute Frame Seal |
|
029 |
126 |
Gland Clamp Bolt |
|
032 |
Frame Plate |
127 |
Impeller – Five Vanes Open |
034 |
Frame Plate Bolt |
130 |
Flange |
036 |
131 |
Gravel Pump Bowl |
|
039 |
Frame Plate Liner Stud |
132 |
Discharge Joint Ring |
040 |
Frame Plate Liner Insert Bolt |
134 |
Clamp Ring |
041 |
135 |
Clamp Ring |
|
043 |
Frame Plate Liner |
137 |
Impeller – Three Vanes Closed |
044 |
Gland |
138 |
Grease Cup Adaptor |
045 |
Gland Bolt |
143 |
Volute Seal Holder |
046 |
Grease Retainer |
144 |
Volute Seal Holder Stud |
049 |
Impeller – Eight Vanes Closed |
145 |
Impeller – Four Vanes Closed |
051 |
Impeller – Two Vanes Open |
147 |
|
052 |
Impeller – Three Vanes Open |
154 |
Sump Pump Discharge Pipe |
053 |
Impeller – Eight Vanes Open |
179 |
Shaft Sleeve Spacer |
056 |
Impeller – Four Vanes Open |
184 |
Sump Pump Flinger |
058 |
Impeller – Six Vanes Closed |
190 |
Suction Cover |
060 |
Intake Joint Ring |
191 |
Impeller – Eight Vanes Open |
061 |
Labyrinth Locknut |
204 |
Discharge Joint |
062 |
Labyrinth |
206 |
Sump Pump Impeller |
063 |
217 |
Impeller O-Ring |
|
064 |
Impeller Sealing O-Ring |
221 |
Flange |
066 |
Motor Support Bolt |
239 |
Release Collar |
067 |
Neck Ring |
241 |
Lip Seal Gland |
070 |
Shaft Key |
290 |
Sump Pump Spacer |
073 |
292 |
Door Clamp Plate |
|
075 |
322 |
Sump Pump Suction Pipe |
|
076 |
360 |
Mechanical Seal Adaptor |
|
078 |
Stuffing Box |
424 |
Mechanical Seal Shaft sleeve |
079 |
Expeller Ring Stud |
|
|