10x8E-M Rubber Lined Slurry Pump with expeller seal that suitable in delivering strong corrosive or abrasive slurries of small particle size without sharp edges.
10x8E-M Medium Duty Slurry Pump is cantilevered, horizontal and centrifugal with double casing structure, It mainly suitable for pumping medium concentration slurries, 10x8E-M slurry pump applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.
Design Features:
√ Modular design for ease of maintenance.
√ Medium duty one piece frame base with lifting points for easy maintenance.
√ Standard ductile iron outer casings for higher working pressures and incorporating lifting points.
√ Standard or advanced bearing assembly improves reliability to extend bearing life reduce lubrication costs.
√ Shaft sealing for increased reliability, stuffing box, expeller, elevated seal or mechanical seal options available.
√ Standard or advanced impeller design options available.
√ Allows ease of fitting multiple liner materials, including hard metal, thick section rubber or polyurethane.
√ Single piece sleeve for stuffing box sealing, lowers stock holding and maintenance.
√ Multi-purpose design allows for reduced inventory requirements and interchangeability.
√ Belt guards allows for ease of maintenance and inspection of belt condition.
Slurry Pump Wear Parts Material Options:
Metal Slurry Pump Wear Parts Material:
√ KmTBCr27 is named in China, which has 27% Chrome. Alloy KmTBCr27 is a wear resistant white iron that offers excellent performance under erosive conditions.
√ KmTBCr28 has the main elements of Chrome 28%, low Carbon with hardness of 430 in Brinell. KmTBCr28 is a corrosion resistant white iron suitable for low pH corrosion duties, where erosive wear is also a problem.
√ KmTBCr35 has the main elements of Chrome 35-45%, low Carbon with hardness of 450 in Brinell. KmTBCr35 is a premium erosion/corrosion alloy to be used where excellent erosion and corrosion resistance is required.
Rubber Slurry Pump Wear Parts Material:
√ PU26 is used for impellers where superior erosive resistance is required in fine particle slurries. The hardness of ER01 makes it more resistant to both chunking wear and dilation (ie, expansion caused by centrifugal forces) as compared to RU55. Ru26 is generally only used for impellers.
√ RU55 has antioxidants and antidegradants, It has been optimized to improve storage life and reduce degradation during use. The high erosion resistance of RU55 is provided by the combination of its high resilience, high tensile strength and low short hardness.
Polyurethane Slurry Pump Wear Parts Material:
√ PU38 is an erosion resistant material that performs well in elastomer applications where "tramp" is a problem. This is attributed to the high tear and tensile strength of PU01. However, its general erosion resistance is inferior to that of natural rubber.
Ceramic Slurry Pump Wear Parts Material:
√ T-SiC Slurry Pump Ceramic Parts is a kind of inorganic nonmetallic materials.Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride.
Customized Materials:
√ Excellence is always making continuous optimization of materials like EPDM, Hapalon, Hastelloy, CD4MCu and other anti-abrasive materials for various applications.
10/8 E M Rubber Medium Duty Slurry Pump Performance Parameters:
|
Model |
Max. Power (kw) |
Materials |
Clear Water Performance |
Impeller Vane No. |
|||||
|
Liner |
Impeller |
Capacity Q ( m3/h) |
Head H ( m) |
Speed n (rpm) |
Eff. η (%) |
NPSH (m) |
|||
|
10/8E-M |
300 |
RU |
RU |
540~1188 |
10~42 |
500~900 |
79 |
5~9 |
5 |
Added to subscribe successful !
