China 6/4D-AH and 8/6E-AH Slurry Pumps Ceramic Shaft Sleeve E075J32 Spare Parts.
Ceramic Slurry Pump spare parts is a kind of inorganic nonmetallic materials.Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, Tobee’s ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature. The Ceramic Slurry Pump Parts mianly included impeller, Liners, Throatbush, Volute, Shaft Sleeve etc., the abrasion resistance of ceramic slurry pump parts are 5 times as wearable as high chrome slurry pump parts. However the weight of ceramic spare parts is only 1/3 of chrome spare parts.
Tobee® Slurry Pump Ceramic Shaft Sleeve which has undergone destructive field tests for over 18 months, has proved to extend part life several times that of steel shaft sleeves on the same pump, same service. Total maintenance costs and down-time were reduced accordingly. Tobee’s slurry pump ceramic shaft sleeves are precision formed of high density alumina, fired, and ground to size. The hardness of ceramics (9.0 to 9.5 MOH Scale) resists this destructive action, In addition, the ceramic coated sleeve surface is highly polished which, together with its lower co-efficient of friction, results in extended sleeve life and long service from the packing.
Centrifugal Slurry Pumps Shaft Sleeves Spare Parts Code List:
|
Shaft Sleeve Code |
AH Slurry Pump |
Shaft Sleeve Materials |
|
B075 |
1.5/1B-AH, 2/1.5B-AH |
SS420, SS304, SS316L, Ceramic |
|
C075 |
3/2C-AH, 4/3C-AH |
SS420, SS304, SS316L, Ceramic |
|
D075 |
4/3D-AH, 6/4D-AH |
SS420, SS304, SS316L, Ceramic |
|
E075 |
6/4E-AH, 8/6E-AH, 8/6R-AH |
SS420, SS304, SS316L, Ceramic |
|
F075 |
8/6F-AH |
SS420, SS304, SS316L, Ceramic |
|
FAM075 |
10/8F-AH, 12/10F-AH, 14/12F-AH |
SS420, SS304, SS316L, Ceramic |
|
SH075 |
10/8ST-AH, 12/10ST-AH, 14/12ST-AH |
SS420, SS304, SS316L, Ceramic |
|
TH075 |
16/14TU-AH |
SS420, SS304, SS316L, Ceramic |
|
TH076 |
16/14TU-AH |
SS420, SS304, SS316L, Ceramic |
|
Shaft Sleeve Code |
HH Slurry Pump |
Shaft Sleeve Materials |
|
CH075 |
1.5/1C-HH |
SS420, SS304, SS316L, Ceramic |
|
D075 |
3/2D-HH |
SS420, SS304, SS316L, Ceramic |
|
E075 |
4/3E-HH |
SS420, SS304, SS316L, Ceramic |
|
F075 |
6/4F-HH |
SS420, SS304, SS316L, Ceramic |
|
Shaft Sleeve Code |
M Slurry Pump |
Shaft Sleeve Materials |
|
E075 |
10/8E-M |
SS420, SS304, SS316L, Ceramic |
|
F075 |
10/8F-M |
SS420, SS304, SS316L, Ceramic |
|
Shaft Sleeve Code |
L Slurry Pump |
Shaft Sleeve Materials |
|
A075 |
20A-L |
SS420, SS304, SS316L, Ceramic |
|
BSC075 |
50B-L |
SS420, SS304, SS316L, Ceramic |
|
C075 |
75C-L |
SS420, SS304, SS316L, Ceramic |
|
D075 |
100D-L |
SS420, SS304, SS316L, Ceramic |
|
E075 |
150E-L |
SS420, SS304, SS316L, Ceramic |
|
S075 |
300S-L |
SS420, SS304, SS316L, Ceramic |
|
Shaft Sleeve Code |
G(H) Gravel Pump |
Shaft Sleeve Materials |
|
D075 |
6/4D-G |
SS420, SS304, SS316L, Ceramic |
|
E075 |
8/6E-G |
SS420, SS304, SS316L, Ceramic |
|
F075 |
10/8F-G |
SS420, SS304, SS316L, Ceramic |
|
G075 |
12/10G-G, 14/12G-G, 12/10G-GH |
SS420, SS304, SS316L, Ceramic |
|
TH075 |
14/12TU-G,16/14TU-G,16/14TU-GH |
SS420, SS304, SS316L, Ceramic |
|
TH076 |
14/12TU-G, 16/14TU-G, 16/14TU-GH |
SS420, SS304, SS316L, Ceramic |
Added to subscribe successful !
