Tobee Ceramic Coated Shaft Sleeve C075-J04 and C075-J05 is used for 3x2 CAH, 4x3 CAH and 75C-L Slurry Pumps, and the ceramic coating shaft sleeve with many good characteristics of abrasion resistance, corrosion resistance etc.
Tobee® Slurry Pump Ceramic Shaft Sleeve which has undergone destructive field tests for over 18 months, has proved to extend part life several times that of steel shaft sleeves on the same pump, same service. Total maintenance costs and down-time were reduced accordingly. Tobee' s slurry pump ceramic shaft sleeves are precision formed of high density alumina, fired, and ground to size. The hardness of ceramics (9.0 to 9.5 MOH Scale) resists this destructive action, In addition, the ceramic coated sleeve surface is highly polished which, together with its lower co-efficient of friction, results in extended sleeve life and long service from the packing.
Ceramic Slurry Pump Spare Parts is a kind of inorganic nonmetallic materials.Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, Tobee's ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature. The Ceramic Slurry Pump Parts mainly included impeller, Liners, Throatbush, Volute, Shaft Sleeve etc., the abrasion resistance of ceramic slurry pump parts are 5 times as wearable as high chrome slurry pump parts. However the weight of ceramic spare parts is only 1/3 of chrome spare parts.
Ceramic Shaft Sleeve codes:
|
Shaft Sleeve Code |
AH Slurry Pump |
Ceramic Shaft Sleeve Materials |
|
B075 |
1.5/1B-AH, 2/1.5B-AH |
J04, J05 |
|
3/2C-AH, 4/3C-AH |
J04, J05 |
|
|
4/3D-AH, 6/4D-AH |
J04, J05 |
|
|
6/4E-AH, 8/6E-AH, 8/6R-AH |
J04, J05 |
|
|
F075 |
8/6F-AH |
J04, J05 |
|
FAM075 |
10/8F-AH, 12/10F-AH, 14/12F-AH |
J04, J05 |
|
SH075 |
10/8ST-AH, 12/10ST-AH, 14/12ST-AH |
J04, J05 |
|
TH075 |
16/14TU-AH |
J04, J05 |
|
TH076 |
16/14TU-AH |
J04, J05 |
|
Shaft Sleeve Code |
HH Slurry Pump |
Ceramic Shaft Sleeve Materials |
|
CH075 |
1.5/1C-HH |
J04, J05 |
|
D075 |
3/2D-HH |
J04, J05 |
|
E075 |
4/3E-HH |
J04, J05 |
|
F075 |
6/4F-HH |
J04, J05 |
|
Shaft Sleeve Code |
M Slurry Pump |
Ceramic Shaft Sleeve Materials |
|
E075 |
10/8E-M |
J04, J05 |
|
F075 |
10/8F-M |
J04, J05 |
|
Shaft Sleeve Code |
L Slurry Pump |
Ceramic Shaft Sleeve Materials |
|
A075 |
20A-L |
J04, J05 |
|
BSC075 |
50B-L |
J04, J05 |
|
C075 |
75C-L |
J04, J05 |
|
D075 |
100D-L |
J04, J05 |
|
E075 |
150E-L |
J04, J05 |
|
S075 |
300S-L |
J04, J05 |
|
Shaft Sleeve Code |
G(H) Gravel Pump |
Ceramic Shaft Sleeve Materials |
|
D075 |
6/4D-G |
J04, J05 |
|
E075 |
8/6E-G |
J04, J05 |
|
F075 |
10/8F-G |
J04, J05 |
|
12/10G-G, 14/12G-G, 12/10G-GH |
J04, J05 |
|
|
TH075 |
14/12TU-G,16/14TU-G,16/14TU-GH |
J04, J05 |
|
TH076 |
14/12TU-G, 16/14TU-G, 16/14TU-GH |
J04, J05 |
Added to subscribe successful !
