Tobee® S Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump .it is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or bioethanol industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.
ANDRITZ S series Pump benefits:
Maximum efficiency of up to 90%
State-of-the-art NPSH behavior
Part load behavior better than industry benchmark
Reduced number of spare parts to be held in stock
The modular system of ANDRITZ end-suction centrifugal pumps only needs 5 bearing support sizes.
The Andritz Pump Parts Front Lining for Andritz S125-350 is a component designed for use in the Andritz S series of pumps. This front lining is made of high-quality materials such as ceramic or elastomer, with the purpose of providing wear resistance against abrasive and corrosive particles commonly found in mining, pulp and paper, or chemical processing applications. The lining serves as a barrier between the pumped medium and the pump housing to protect the pump from wear and damage, thereby increasing the service life of the pump. The lining is easy to install and maintain, ensuring that the pump operation remains stable and efficient. Additionally, this front lining can be customized to meet specific requirements and applications, resulting in a reliable solution for pump wear protection.
Tobee® manufactures Andritz alternative ACP, S, VP, FP, CP series Paper & Pulp Stock Pumps and Pumps Wearing Spares, all the pumps and spares parts are widely for Paper mills, Paper Pulp, Coal prep, Waste pulp, Paper stock, Paper making, Waste paper stock, Chemical slurries, Sugar refining, Recycled fiber preparation, Chemical industry, Food industry, Energy supply, Water supply, Waste water treatment, Alkali recovery, Sugar syrup, Molasses, Pharmaceuticals industry, Potash Fertilizer Plant, Other industries etc.
Andritz S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for Andritz S series paper-pulp pumps.
Andritz S Pump Models and Spares:
S80-265, S100-265, S125-265, S3 100-350.3, S125-350, S150-330, S3 125-400, S3 150-400.3, S3 200-380, S8 200-380, S3 150-470.3, S3 200-470.3, S3 250-430.3, S3 350-470.3, S8 350-470.6, S500-600, etc.
Design Features:
• Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration.
• Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation.
• Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc
• Shaft seal - Mechanical seals and packing seal can be used as per requested
• Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
Tobee® Paper Pulp Pumps and Pump Spare Parts On-site Applications:
Paper mills, Paper Pulp, Coal prep, Waste pulp, Paper stock, Paper making, Waste paper stock, Chemical slurries, Sugar refining, Recycled fibre preparation, Chemical industry, Food industry, Energy supply, Water supply, Waste water treatment, Alkali recovery, Sugar syrup, Molasses, Pharmaceuticals industry, Potash Fertilizer Plant, Other industries etc.
ANDRITZ centrifugal pumps are available in a highly wear-resistant, open impeller design. Thanks to their low axial thrust and open channels, these centrifugal pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. Thus, operating as processes pumps, they cover a wide range of applications in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, ANDRITZ single-stage centrifugal pumps can also be used in water supply, waste water treatment, desalination plants, and irrigation as well as drainage. A modular system ensures high availability, enables the use of proven components and reduces the number of spare parts to be held in stock. They have a single-stage, single-flow, open or semi-open impeller. They have a consistency of up to 6%, heads of 10-180 m and a flow rate of 8,000 m³/h. Their pressure measure of up to 40 bar, with an operating temperature of up to 200°C and an efficiency rate of 90% and higher. ANDRITZ centrifugal pumps can be delivered with and for an Industrial Internet of Things upward interchangeable base.
Added to subscribe successful !
