ANDRITZ centrifugal pumps are available in a highly wear-resistant, open impeller design. Thanks to their low axial thrust and open channels, these centrifugal pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. Thus, operating as processes pumps, they cover a wide range of applications in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, ANDRITZ single-stage centrifugal pumps can also be used in water supply, waste water treatment, desalination plants, and irrigation as well as drainage. A modular system ensures high availability, enables the use of proven components and reduces the number of spare parts to be held in stock. They have a single-stage, single-flow, open or semi-open impeller. They have a consistency of up to 6%, heads of 10-180 m and a flow rate of 8,000 m³/h. Their pressure measure of up to 40 bar, with an operating temperature of up to 200°C and an efficiency rate of 90% and higher. ANDRITZ centrifugal pumps can be delivered with and for an Industrial Internet of Things upward interchangeable base.
Andritz Single-stage Centrifugal Pump Specification:
Pump type: Horizontal
Materials: Cast Iron, Duplex, Super Duplex, Stainless Steel
Seal arrangement: Mechanical Seal, Double Seal
Max temperature: 200 Celsius
Tobee® Stainless Steel impeller pump Applicable industries:
1、Paper industry: for conveying pulp with a concentration of less than 6% and for circulating, lifting and pressurizing the medium in the industrial process of alkali recovery.
2、Sugar industry: used for conveying syrup with concentration below 4% and viscosity below 150mm2/s.
3、Urban sewage industry: used for circulation conveying, lifting and pressurization of medium in sewage treatment process. Water and watewater treatment. transport the non-abrasion medium in other industries.
ANDRITZ ACP and S series Pump benefits:
Maximum efficiency of up to 90%
State-of-the-art NPSH behavior
Part load behavior better than industry benchmark
Reduced number of spare parts to be held in stock
The modular system of ANDRITZ end-suction centrifugal pumps only needs 5 bearing support sizes.
Design Features:
• Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration.
• Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation.
• Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc
• Shaft seal - Mechanical seals and packing seal can be used as per requested
• Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
Tobee® S Paper Pulp Pumps Quick Selection Chart:
Added to subscribe successful !
