ANDRITZ centrifugal pumps are available in a highly wear-resistant, open impeller design. Thanks to their low axial thrust and open channels, these centrifugal pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. Thus, operating as processes pumps, they cover a wide range of applications in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, ANDRITZ single-stage centrifugal pumps can also be used in water supply, waste water treatment, desalination plants, and irrigation as well as drainage. A modular system ensures high availability, enables the use of proven components and reduces the number of spare parts to be held in stock. They have a single-stage, single-flow, open or semi-open impeller. They have a consistency of up to 6%, heads of 10-180 m and a flow rate of 8,000 m³/h. Their pressure measure of up to 40 bar, with an operating temperature of up to 200°C and an efficiency rate of 90% and higher. ANDRITZ centrifugal pumps can be delivered with and for an Industrial Internet of Things upward interchangeable base.
Paper pulp Pumps Advantages:
1. High efficiency and energy saving: The operating efficiency is 3-10 percentage points higher than that of ordinary pulp pumps on average, and the energy saving and consumption reduction reach 15-30%.
2. Good cavitation performance and long service life: the actual service life can be 2-3 times longer than that of ordinary pulp pumps;
3. High concentration and no clogging: the pulp concentration can reach 6%;
4. Reasonable structure and convenient maintenance: The pump head part adopts a front and rear door-opening structure. There is no need to disassemble the pipeline during maintenance. The pump can be disassembled and repaired by simply moving the motor backward.
Tobee™ Andritz Pump Spare Parts Design Features:
Bearing assembly--A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners--Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
Casing--Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller--front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Throatbush--Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Tobee® Paper Pulp Stock Pump Applicable industries:
1、Paper industry: for conveying pulp with a concentration of less than 6% and for circulating, lifting and pressurizing the medium in the industrial process of alkali recovery.
2、Sugar industry: used for conveying syrup with concentration below 4% and viscosity below 150mm2/s.
3、Urban sewage industry: used for circulation conveying, lifting and pressurization of medium in sewage treatment process. Water and wastewater treatment. transport the non-abrasion medium in other industries.
Added to subscribe successful !
