Tobee® AHR Rubber Lined Slurry pumps are interchangeable with world's standard AHR rubber lined slurry pumps for heavy duties,The THR rubber slurry pump is cantilevered, horizontal, centrifugal, natural rubber lined slurry pump for handling strong corrosive or abrasive slurries of small particle size without sharp edges in the mining, mineral dressing, metallurgy, coal, power, building material and other industrial departments etc.
Tobee® AHR Rubber Lined Slurry Pumps Design Features:
√ Double casings design centrifugal rubber lined slurry pump, wide passage for solids
√ Bearing assembly & frame: Both standard & high capacity types available.
√ A large diameter shaft with a short overhang minimizes deflection and vibration.
√ Heavy duty roller bearing is housed in a removable bearing cartridge.
√ Rubber slurry pump body is fastened with the frame by minimum bolts.
√ Slurry pump impeller adjustment is provided in a convenient position below the bearing assembly.
√ Slurry pump Impeller & liner material: natural rubber etc
√ High efficiency impeller available: up to 86.5% for certain type.
√ Interchangeable wet parts material: High chrome alloy metal: PH: 5-12; natural rubber: PH: 4-12.
√ Shaft seal: Packing seal, centrifugal seal, mechanical seal.
√ Discharge branch: 8 positions in each 45°.
√ Driving type: V-belt, flexible coupling, gearbox, hydraulic coupler etc.
Tobee® AHR Rubber Lined Slurry Pumps Performance Parameters:
|
Model |
Max. Power (kw) |
Materials |
Clear water performance |
Impeller Vane No. |
|||||
|
Liner |
Impeller |
Capacity Q (m3/h) |
Head H (m) |
Speed n (rpm) |
Eff. η (%) |
NPSH (m) |
|||
|
30 |
Rubber |
Rubber |
79.2-180 |
5-34.5 |
800-1800 |
59 |
3-5 |
5 |
|
|
60 |
Rubber |
Rubber |
79.2-180 |
5-34.5 |
800-1800 |
59 |
3-5 |
5 |
|
Tobee® Rubber Lined Slurry Pump Transmission Options:
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of
the motor.
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the
motor support frame which is located on the bearing support above the slurry pump.
ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.
Tobee® AHR Rubber Lined Slurry Pumps Applications:
AHR series rubber slurry pumps are widely used in Mineral processing, Ball mill discharge, Bottom/fly ash, lime grinding, Coal, Coarse sand, Coarse tailings, Dredging, FGD, Fine tailings, Cyclone feed, Flotation, Heavy media, Minerals concentrate, Mineral sands, Ni acid slurry, Oil sands, Tallings, Phosphoric acid, Phosphate matrix, Process chemical, Pulp and paper, Rod mill discharge, SAG mill discharge, Wet crushers etc.
Contact information：
Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317
Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store
Added to subscribe successful !
