AH8x6E Mining High Density Slurry Pump

Tobee^® AH8x6 Heavy Duty Slurry Pump is a kind of horizontal centrifugal slurry pump for heavy duties application. It is suitable for delivering low density slurry for metallurgical,mining,coal and building material departments.The shaft seal adopts both gland seal and centrifugal seal. The TH8x6 pump operates in high efficiency with stable capacity to save floor area. The wetted parts are changeable with wear-resistant metal liners and rubber liners.

Design Features:

• Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
• Ductile iron fully lined casing provides durability, strength, safety, and long service life.
• Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
• Large, open internal passages designed to reduce internal velocities, maximise wear life and lower operating costs.
• Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximise wear life.
• Minimal shaft/impeller overhang reduces shaft deflection and increases packing life.
• Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life.
• Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime.
• Optional dry running shaft seal reduces or eliminates flush water requirements.
• Effective expeller prolongs packing life while reducing or eliminating flush water requirement.
• Now featuring throatbush and impeller combination designed to enhance efficiency and improve wear performance.
• Interchangeability of seal arrangements – full flush, low flow, centrifugal, or mechanical seals may be fitted to any sized pump.

Tobee^® AH8x6 Heavy Duty Slurry Pump Performance Parameters:

Tobee^® TH8x6 Heavy Duty Slurry Pump Shaft Seal Arrangement:

Packing Seal:
As one of the most commonly used seals for rotating shafts, the packing seal can come with low-flush or full flush arrangement which uses flushing water to prevent media from escaping the pump housing. This kind of seal is suitable for use under all pumping conditions. In situations where corrosive solids or high temperature might be encountered, Teflon or aramid fiber is used as the packing material for the gland. For high abrasion conditions, a ceramic shaft sleeve is available.

Expeller seal:
The combination of impeller and expeller creates the pressure needed to seal against leakage. Together with the gland seal or lip seal which is used as the shut-down seal, this type of seal can handle sealing requirements for applications where full-flush gland seal is impractical due to lack of water on the site, or sealing water is allowed to enter inside the pumping chamber to dilute the slurry.

Mechanical Seal:
TH heavy duty slurry pump utilizes a leak-proof mechanical seal design which allows easy installation and replacement. Other types of mechanical seal are among options to suit the slurry pump for various pumping applications. Tobee pump also utilizes special ceramic and alloys of high strength and hardness on parts that are subjected to friction. Unique design of and seamless fit between the mechanical seal and seal chamber provides excellent resistance to abrasion and shock that ensures its effectiveness under the toughest conditions.

Tobee^® AH8x6 Heavy Duty Slurry Pump Driven Type:

CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.

Contact information：
Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317
Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn  | Web: www.tobee.store