Andritz Interchangeable VP125-350 Paper Pulp Spares Parts Volute Casing

Tobee® manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps, VP series pumps, CP series pumps etc.

Tobee™ Equivalent Andritz Pump Spare Parts Design Features:
Bearing assembly--A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners--Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
Casing--Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller--front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
 Throatbush--Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

Interchangeable ANDRITZ centrifugal pumps:
Transport flow: max 6000 m³/h (standard pump)
Transport flow: max 85 m³/s (special pumps)
Transport pressure: max. 16 bar (standard pump)
 

High quality wear protection
Over 90% efficiency
Free flow pumps for substances with solids up to 140m
Construction with extremely low vibrations
Optimal behavior at partial load
Low life cycle costs

Ideal for: Chemical industry, paper and pulp industry, lye, water supply, cooling circuits, fibrous media, abrasive sludge, wastewater treatment and transport, sugar industry, power plant technology.

Andritz centrifugal pumps are used for pumping various fluids and have a very high efficiency in the work points due to the innovative manufacturing process and the materials used. The pumps are built horizontally, vertically, multi-storey and specially, embedded in concrete, for very large volumes of water.

Acid or alkaline
No solids content or high content;
Fluids neutral or aggressive / dangerous to health;
Applications:

Clean water, irrigation
Oil and gas (according to ISO5199 and ATEX protection)
Crude oil and condensate
Pulp and paper industry
Chemical industry
Water capture
Options:

According to ATEX, EN733 and ISO5199 standards
Selection of high quality materials

Tobee® Paper Pulp Pumps and Pump Spare Parts On-site Applications: Paper mills, Paper Pulp, Coal prep, Waste pulp, Paper stock, Paper making, Waste paper stock, Chemical slurries, Sugar refining, Recycled fiber preparation, Chemical industry, Food industry, Energy supply, Water supply, Waste water treatment, Alkali recovery, Sugar syrup, Molasses, Pharmaceuticals industry, Potash Fertilizer Plant, Other industries etc.