Tobee® Spare Parts GAHF8083A05 Armored disk front Throat bush are used on 8AHF Horizontal Froth Pump, Secondary Spiral Feed Pump, Centrifugal Single Stage and Single Suction Slurry Pump, Thickener Tailings Pump, Overdense Medium Pump, Classifying Cyclones Feed Pump.
Tobee® Pump Throat Bush Code:
|
Throat Bush Code |
Slurry Pump Materials |
|
|
E4083 |
6/4D-AH, 6/4E-AH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
F6083 |
8/6E-AH, 8/6F-AH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
G8083 |
10/8F-AH, 10/8ST-AH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
G10083 |
12/10ST-AH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
G12083 |
14/12ST-AH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
H14083 |
16/14TU-AH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
Throat Bush Code |
Slurry Pump Materials |
|
|
DH2083 |
3/2D-HH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
DH3083 |
4/3E-HH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
FH4083 |
6/4F-HH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
Throat Bush Code |
Gravel Pump Materials |
|
|
GG1412013-1 |
12/10G-G |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
GGH10013 |
12/10G-GH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
FGH8013 |
10/8S-GH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
|
HG14130M |
16/14TU-GH |
A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
Tobee® AHF Horizontal Froth Pumps are heavy duty horizontal pumps designed to handle difficult tenacious froth.
Tobee® Horizontal Froth Pump Design and Sizes:
Based on the AH or L series slurry pumps Existing AH or L series slurry pumps can be converted to AHF/MF/ LF horizontal froth pumps with only a few modifications, Inducer blade impeller for positive froth feed, Enlarged high efficiency slurry throatbush to maximize the inlet size and reduce NPSH required, Standard AH or L slurry pump mounting and flange center lines, Available in 2” through 14” froth pump discharge sizes; 2CAHF, 3DAHF, 4E-AHF, 6D-AHF, 8ST-AHF, 8G-AHF, 10ST-AHF, 12ST-AHF, 14TU-AHF etc.
Tobee® AHF Horizontal Froth Pumps Design Features:
• Heavy duty construction with through-bolt design provides ease of maintenance and less down time.
• Ductile iron fully lined casing provides durability, strength and long service life.
• Large diameter, slow turning, high efficiency impellers maximize wear life and lower TOC.
• Large, open internal passages reduce internal velocities maximizing wear life resulting in lower operating costs.
• Unique impeller design for most difficult froth applications.
• Thick elastomer or metal bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and inter mixability to reduce over all maintenance costs and maximize wear life.
• Minimal shaft/impeller overhang reduces shaft deflection and increases packing life.
• Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life.
• Standard AH can be converted by replacing cover plate, throat bush and impeller.
• Full flush, low flow or dry running centrifugal seals minimize water usage and operating costs.
Added to subscribe successful !
