Tobee® F6083A05A Throat Bush Parts is an important wear parts in 8/6 AH Slurry Pump, and the Throat bush is common in bigger pumps, because throat bush and volute liner are normally in one solid piece in small pumps. The design of slurry pump throat bush is based on cost effective in manufacturing and operation.
Tobee® Slurry Pump Materials Description and Performance:
|
Code |
Description |
Hardness |
Performance |
Applications |
|
T05 |
27% High chrome alloy |
HRC≥60 |
Erosion resistance is marginally lower than T07 and has corrosion resistance. |
Used for high wear applications with a slurry pH between 5 and 12. |
|
T07 |
15% High chrome alloy |
HRC≥62 |
Excellent erosion resistance and has higher wear resistance than T05 |
Mining pumps ideal for high impact and high pressure applications, such as pumping slurries with sharp, hard, and coarse solids at high flow rate. |
|
T12 |
30% Ultra chrome alloy |
HRC≥65 |
With abrasion resistance better than T05 and T07. |
Suitable for highly abrasive pumping applications. |
|
T33 |
35% Hyper chrome alloy |
HRC=35 |
This material has erosive and corrosive resistance in low pH applications. Its abrasion resistance is higher than that of M49. |
The material can be used to transport oxygenated slurries with pH of not less than 1 such as phosphor-plaster, nitric acid, vitriol, phosphate etc |
|
T49 |
29% High chrome alloy |
HRC=43 |
With a certain degree of scour resistance and good corrosion resistance under low pH conditions. Its abrasion resistance is higher than T05. |
Particularly suitable for use in flue gas desulphurization as well as mild acid applications with pH value no less than 4. |
|
RU26 |
Natural Rubber |
Shore(A)=40-55 |
High resistance to abrasion and corrosion |
An optimal choice for conveying acid slurry and slurry with fine granular particles at ambient temperature. |
|
SY45 |
Butyl Rubber |
Shore(A)=60 |
Resistance to corrosion, abrasion, and high temperature |
Ideal for transporting acid slurry and slurry with fine solid particles at temperatures between 60℃ and120℃. |
|
SY31 |
Hypalon Rubber |
|
Ultra-high resistance to corrosion and high temperature |
Suitable for pumping strong acids and alkalis with temperatures above 100℃. |
|
PU01 |
Polyurethane |
Shore A10-D80 |
PU01 is an erosion resistant material that performs well in elastomer applications where 'tramp' is a problem. |
Suitable for pumping high abrasion with high corrosion medium. |
Interchangeable Slurry Pump Throat bush Code:
|
Throat bush Code |
AH Slurry Pump |
Materials |
|
6/4D-AH, 6/4E-AH |
High chrome, Natural rubber, Polyurethane |
|
|
8/6E-AH, 8/6F-AH |
High chrome, Natural rubber, Polyurethane |
|
|
10/8F-AH, 10/8ST-AH |
High chrome, Natural rubber, Polyurethane |
|
|
12/10ST-AH |
High chrome, Natural rubber, Polyurethane |
|
|
14/12ST-AH |
High chrome, Natural rubber, Polyurethane |
|
|
16/14TU-AH |
High chrome, Natural rubber, Polyurethane |
|
|
Throat bush Code |
HH Slurry Pump |
Materials |
|
3/2D-HH |
High chrome, Polyurethane |
|
|
DH3083 |
4/3E-HH |
High chrome, Polyurethane |
|
FH4083 |
6/4F-HH |
High chrome, Polyurethane |
|
Throat bush Code |
G(H) Gravel Pump |
Materials |
|
GG1412013-1 |
12/10G-G |
High chrome |
|
GGH10013 |
12/10G-GH |
High chrome |
|
FGH8013 |
10/8S-GH |
High chrome |
|
HG14130M |
16/14TU-GH |
High chrome |
Tobee™ 8/6 AH Slurry Pump After-sales Service:
As the slurry pump wet ends parts such as the impeller,volute liner,FPL insert,Throat bush are consumption parts and we could provide you always the qualified slurry pump parts within very short time.
Packing Transport Services
Considering the order pump size and we could provide case or pallet as per your need to make sure it safe enough during the long distance road and ocean shipping.have its own export company and so we could help you find the best ocean shipping solution and service for you from the goods out of factory to your destination.
Installation Services
Tobee Pump have more than 30 years experienced pump installation workers and are very aware of any onside application.We could provide abroad pump installation service and expect pump manufacturing and sales,abroad pump installation is getting more and more popular by our regular clients abroad.
Technical Support Services
Technical data sheet,Performance curve,General arrangement drawing,Operating manual will be sent within 24th for your checking, So Pls feel free to contact us If you have any need.
Added to subscribe successful !
