SP65092A05A Casing is used for 65QV-SP Vertical Slurry Pump.
The Vertical Slurry Pump Casing have a heavy walled abrasive resistant high chrome alloy.
65QV-SP Vertical Slurry Pump is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 65QV-SP vertical sump pumps are available in various standard lengths to suit common sump depths, offers a wide range of configurations allowing the pump to be tailored to a specific application. Wetted components are available in a wide range of alloys and elastomers. They are ideally suited for handling abrasive and corrosive liquids and slurries while submerged in sumps or pits.
SP Vertical Pump Design Features:
√ Less wear, less corrosion
Wetted components are available in a wide range of alloys and elastomers, from which Weir Minerals selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance and where larger particles or high density slurries are encountered.
• Abrasion resistant A05 Ultrachrome® alloy.
• Abrasion/corrosion-resistant A49 Hyperchrome® alloy.
• Corrosion-resistant stainless steels.
• Natural and synthetic elastomers.
√ No submerged bearing failures
The robust cantilever shaft avoids the need for lower submerged bearings - which are often the source of premature bearing failure.
• Heavy duty roller bearings, above mountingplate.
• No submerged bearings.
• Labyrinth/flinger bearing protection.
• Rigid, large diameter shaft.
√ No shaft sealing problems
The vertical cantilever design requires no shaft seal.
√ No priming required
The top and bottom inlet design is ideally suited for “snore” conditions.
√ Less risk of blocking
The screened inlets and large impeller passages reduce the risk of blockages.
√ Zero ancillary water costs
The vertical cantilever design with no gland or submerged bearings avoids the need for expensive gland or bearing flushing water.
65QV-SP Vertical Slurry Pump Parts List:
| No. | Pump Model | Part Name | Basic Part No. | Part Code | Material |
| 1 | 65QV-SP | Bearing Housing | 004 | QV004-1 | Ductile |
| 2 | 65QV-SP | Bearing Sleeve | 008 | QV008 | - |
| 3 | 65QV-SP | Bearing | 009 | Q009 | SKF/Timken (Standard) |
| 4 | 65QV-SP | Bearing | 009D | Q009D-1 | SKF/Timken (Standard) |
| 5 | 65QV-SP | Mounting Plate | 019 | QV65019 | Steel |
| 6 | 65QV-SP | End Cover | 024 | QV024 | Ductile |
| 7 | 65QV-SP | Low End Cover | 024L | QV024L-1 | Steel |
| 8 | 65QV-SP | Key | - | QV070 | Steel |
| 9 | 65QV-SP | Washer | - | 60 | Steel |
| 10 | 65QV-SP | Shim Set | 025 | QV025 | - |
| 11 | 65QV-SP | Nipple | - | M10X1 | Steel |
| 12 | 65QV-SP | Name Plate | - | - | - |
| 13 | 65QV-SP | Rivet | - | - | Steel |
| 14 | 65QV-SP | Back Liner | 041 | SP65041 | Chrome alloy |
| 15 | 65QV-SP | Suction Joint | 060 | SP65060 | - |
| 16 | 65QV-SP | Lock Nut | 061 | QV061 | Steel |
| 17 | 65QV-SP | Labyrinth | 062 | QV062 | Steel |
| 18 | 65QV-SP | Nipple 45 | - | M10X1 | Steel |
| 19 | 65QV-SP | O Ring | 064 | QV064 | Ductile |
| 20 | 65QV-SP | Shaft | 073 | QV65073 | Steel |
| 21 | 65QV-SP | Shaft Sleeve Ejector | 077 | QV077 | - |
| 22 | 65QV-SP | Bearing Seal | 089 | QV089 | - |
| 23 | 65QV-SP | Casing | 092 | Chrome alloy | |
| 24 | 65QV-SP | Column | 102 | QV65102 | - |
| 25 | 65QV-SP | Piston Ring | 108 | Q108 | Steel |
| 26 | 65QV-SP | End Cover Set Screw | - | D027M | Steel |
| 27 | 65QV-SP | Strainer | 116 | SP65116-1 | - |
| 28 | 65QV-SP | Lower Strainer | 116L | SP65116L | D21 |
| 29 | 65QV-SP | Casing Seal | 124 | D3125 | - |
| 30 | 65QV-SP | Discharge Pipe | 154 | QV65154 | - |
| 31 | 65QV-SP | Flinger | 184 | QV184-1 | - |
| 32 | 65QV-SP | Discharge Pipe Gasket | 204 | SP65204 | - |
| 33 | 65QV-SP | Impeller | 206 | Chrome alloy | |
| 34 | 65QV-SP | O Ring | 217 | QV217 | Steel |
| 35 | 65QV-SP | Spacer Set | 290 | QV290 | - |
| 36 | 65QV-SP | Suction Pipe | 322 | SP65322 | - |
Added to subscribe successful !
