6x5x14 Sand Pumps for Drilling Rig Application

Tobee® Sandman™  6x5x14 Sand Pumps for Drilling Rig Application.

Tobee® Sandman™ Mission 2500 6x5x14 Supreme Pumps are designed for the oil and gas drilling equipment. It adopts axial suction structure, and the flow parts are hard iron. It is suitable for transporting corrosive drilling fluid with suspended particles or other liquids in similar working conditions. It is the best matching pump for desander, desilter and jet mixing device.

Tobee® Sandman™ 6x5x14 Mission 2500 Supreme Pump Impellers can cut any size according to the requirements:

H2524-70-30 Impeller 6×5-11 inch
H2524-74-30 Impeller 6×5-11.5 inch
H2524-80-30 Impeller 6×5-12 inch
H2524-84-30 Impeller 6×5-12.5 inch
H2524-90-30 Impeller 6×5-13 inch
H2524-94-30 Impeller 6×5-13.5 inch
H2524-A0-30 Impeller 6×5-14 inch

Tobee®  Sandman™ Alternative  2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).

Tobee®  Sandman™ Alternative  2500 Supreme Design Features:

• Versatile stuffing box
• Thick, strong, concentric casing with replaceable casing wear pad
• Casing gasket receded for protection.
• Replaceable stuffing box cover with dual stuffing box bolts
• Long-life, no-adjustment mechanical seal available for near zero leakage
• Replaceable shaft sleeve
• Solid Frame base
• Labyrinth seals for maximum bearing protection
• Duplex angular contact bearings
• Full pipe diameter entrance for minimum turbulence and maximum efficiency
• Wide semi-open impeller creates lower axial thrust for improved bearing life

• All sizes feature the same power end

Mission 2500 Supreme Pump Dimensions:

Typical Applications:

• Barite, ferric oxide, and mineral oil
• Base drilling mud
• Glass fibers
• Sugar processing
• Ash or coal conveyers
• Cement
• Mine de-watering
• Lime slurries
• Kaolin clay
• Crystalline forms

According to the different working conditions, Mission centrifugal pumps can be used as Frac discharge pump, Frac suction pump, Oil drilling centrifugal pump, electric centrifugal transfer pump, Skid mounted mixing pump, Transfer pump, Trash pump, Grinding pump, Circulating mud pump, Centrifugal sludge pump, Drilling fluid centrifugal pump, Horizontal directional drilling pump, Denver pump, Filling pump, Feeding pump, etc.

 Email: Sales6@tobeepump.com | Mob: +86-18033757329  | Skype: Sales6_867|  www.missionmagnum.com