Name: 250TV-SP Vertical Spindle Pump impeller SP25206A05
Price: 3500.00 USD

250TV-SP Vertical Spindle Pump impeller SP25206A05

Product Brands: Tobee

SP25206A05 Open impeller is a 5 Vanes Open Impeller for 250 TV SP Vertical spindle slurry pump,

price:

$3500.00 $3600.00

Model:

250TV-SP

Part Codes:

SP25206A05

HS Code:

8413910000

Quantity:

- + (69 available)

Add to Favorite Items (0)

Sales: 0+

SP25206A05 Open impeller is a 5 Vanes Open Impeller for 250 TV SP Vertical spindle slurry pump, the open impeller of slurry pump has vanes that are open on both sides without any protective shroud. As they don’t have any support either side they tend to be weaker, and therefore are typically used in smaller, inexpensive pumps that aren’t operated under significant strain. Whilst they are able to handle a degree of solid content unlike closed impellers, they require a higher NPSH to operate without cavitation, damage and loss of efficiency.

Impeller is a rotating component of a centrifugal pump, which transfers energy from the motor that drives the pump to the fluid being pumped by accelerating the fluid outwards from the center of rotation.

Usually the impeller made of iron, steel, bronze, brass, aluminum or plastic. For Slurry pump impeller normally made of High chrome alloy, elastomer, polyurethane and some other customed. But High chrome alloy and elastomer are the main material for the slurry pumps.
There are Open, Semi Open and Closed impeller. For different conditions, different pumps, there will be different type impellers, but Closed ones are much more widely used. It has high efficiency and power transfer.
For impeller vanes, there are from 2 to 6 quantity for different requirements. More vanes will make it higher efficiency, but also lower passage for solids of slurry pump impeller.
Another data for the Slurry pump impeller is the passage, it will decide the max solid the impeller can pump, so check this with the pump supplier is vert important. Or it may get stuck when you use the pump.

Tobee® Vertical Slurry Pump Replacement Parts:

Code	Part Name	40 PV-SP(R)	65 QV-SP(R)	100 RV-SP(R)	150 SV-SP(R)	200 SV-SP(R)
4	Bearing Housing	PV 004	QV 004-1	RV 004-1	SV 004-1	SV 004-1
8	Bearing Sleeve	PV 008	QV 008	QV 008	SV 008	SV 008
19	Mounting Plate	PV 4019	QVR 65019	QV 10019-1	SV 15019-1	SV 20019
19	Mounting Plate	PVR 4019		RVR 10019	SVR 15019-1
24	End Cover	PV 024	QV 024	RV 024	SV 024	SV 024
024L	Low End Cover	PV 024 L	QV 024 L-1	RV 024 L-1	SV 024 L-1	SV 024 L-1
25	Shim Set	PV 025	QV 025	RV 025	SV 025
41	Back Liner	SP 4041	SP 65041	SP 10041	SP 15041	SP 20041
41	Back Liner	SPR 4041	SPR 65041	SPR 10041
60	Suction Joint	SP 4060	SP 65060	SP 10060	SP 15060
60	Suction Joint			E 4060
62	Labyrinth	PV 062	QV 062	RV 062	SV 062	SV 062
64	O Ring	PV 064		RV 064
64	O Ring			E 064	F 064
73	Shaft	PV 4073 E	QV 65073 E	RV 10073 G	SV 15073 J	SV 15073 J
		PV 4073 G	QV 65073 G	RV 10073 J	SV 15073 L	SV 15073 L
			QV 65073 J	RV 10073 L	SV 15073 N	SV 15073 N
				RV 10073 M
				RV 10073 Q
		PVR 4073 E	QVR 65073 E	RVR 10073 G	SVR 15073 J
		PVR 4073 G	QVR 65073 G	RVR 10073 J	SVR 15073 L
		PVR 4073 J	QVR 65073 J	RVR 10073 L	SVR 15073 N
		PVR 4073 L
77	Shaft Sleeve Ejector	PV 077	QV 077	RV 077	SV 077	SV 077
89	Bearing Seal	PV 089	QV 089	RV 089	SV 089
92	Casing	SP 4092	SP 65092	SP 10092	SP 15092	SP 20092
92	Casing	SPR 4092	SPR 65092	SPR 10092
102	Column	PV 4102 E	QV 65102 E	RV 10102 G	SV 15102 J	SV 20102
		PV 4102 G	QV 65102 G	RV 10102 J	SV 15102 L
			QV 65102 J	RV 10102 L	SV 15102 N
				RV 10102 M
				RV 10102 Q
		PVR 4102 E	QVR 65102 E	RVR 10102 G	SVR 15102 J
		PVR 4102 G	QVR 65102 G	RVR 10102 J	SVR 15102 L
		PVR 4102 J	QVR 65102 J	RVR 10102 L	SVR 15102 N
		PVR 4102 L
108	Piston Ring	C 108	D 108	D 108	S 108
108	Piston Ring			R 108
109			BSC 109
116	Strainer	SP 4116	SP 65116-1	SP 10116-1	SP 15116-1	SP 15116 L
116L	Lower Strainer	SP 4116 L	SP 65116 L	SP 10116 L	SP 15116 L
		SPR 4116 L	SPR 65116		SPR 15116 L
			SPR 65116 L	SPR 10116 L
124	Casing Seal			E 4124	F 8124
125		SP 4125	D 3125	D 3125	DH 2125
				E 4132 XLP
153		SPR 4153	SPR 65153
154	Discharge Pipe	PV 4154 E	QV 65154 E	RV 10154 G	SV 15154 J	SV 20154 J
		PV 4154 G	QV 65154 G	RV 10154 J	SV 15154 L	SV 20154 L
			QV 65154 J	RV 10154 L	SV 15154 N	SV 20154 N
				RV 10154 M
				RV 10154 Q
		PVR 4154 E	QVR 65154 E	PVR 10154 G	SVR 15154 J
		PVR 4154 G	QVR 65154 G	PVR 10154 J	SVR 15154 L
		PVR 4154 J	QVR 65154 J	PVR 10154 L	SVR 15154 N
		PVR 4154 L
184	Flinger	PV 184	QV 184-1	RV 184-1	SV 184-1
184	Flinger	PVR 184	QVR 184	RVR 184	SVR 184
204	Discharge Pipe Gasket	SP 4204	SP 65204	SP 10204	SP 15204	SP 20204
204	Discharge Pipe Gasket				SP 20204
206	Impeller	SP 4206	SP 65206-1	SP 10206	SP 15206 A	SP 20206
206	Impeller	SPR 4206	SPR 65206 A	SPR 10206 A
217	O Ring	PV 217	QV 217	RV 217	SV 217
221		SP 4221	SP 65221		SP 15221
290	Spacer Set	PV 290	QV 290	RV 290	SV 290
315		PV 315	QV 315	QV 315	SV 315
322	Suction Pipe	SP 4322 A	SP 65322 A	SP 10322 A	SP 15322 A
		SP 4322 C	SP 65322 C	SP 10322 C	SP 15322 C
		SP 4322 E	SP 65322 E	SP 10322 E	SP 15322 E
		SP 4322 G	SP 65322 G	SP 10322 G	SP 15322 G
		SP 4322 J	SP 65322 J	SP 10322 J	SP 15322 J
		SP 4322 L	SP 65322 L	SP 10322 L	SP 15322 L
		SPR 4322 A	SPR 65322 A	SPR 10322 A	SPR 15322 A
		SPR 4322 C	SPR 65322 C	SPR 10322 C	SPR 15322 C
		SPR 4322 E	SPR 65322 E	SPR 10322 E	SPR 15322 E
		SPR 4322 G	SPR 65322 G	SPR 10322 G	SPR 15322 G
		SPR 4322 J	SPR 65322 J	SPR 10322 J	SPR 15322 J
		SPR 4322 L	SPR 65322 L	SPR 10322 L	SPR 15322 L

The SP/SPR pump design with either hard metal (SP) or elastomer covered (SPR) components makes it ideal for:

• abrasive and/or corrosive slurries

• large particle sizes

• high density slurries

• continuous or “snore” operation

• heavy duties demanding cantilever shafts

The SP/SPR heavy duty sump pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 metres.

Pumping is maintained even when the top inlet is not submerged, thus enabling the level of liquid to be lowered right down to the bottom inlet or the bottom of any suction extension pipe.

To suit special requirements other slurry pump wet ends can be fitted to the standard SP vertical slurry pump dry end.

Label: 40PV-SP Vertical Pump impeller SP40206A05; 65QV-SP

(0 Reviews)

Write a Review

See All >