Sandman® 24022-01-30A(651120206) Casing used for Mission Magnum XP Blender Suction Pump.
Mission Magnum 8x6x18, 12x10x23 and 14x12x22 Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy duty bearings are permanently lubricated to minimize maintenance.
Mission XP Frac Pump Design Features:
• Versatile stuffing box
• One piece casing
• Casing gasket receded for protection
• Back vanes reduce collection of solids at stuffing box
• Long-life, no-adjustment mechanical seal available for near zero leakage
• Replaceable shaft sleeve
• Lip seals for maximum bearing protection (Labyrinth seals optional)
• Duplex angular contact bearings
• Thicker, stronger concentric casings
• Full pipe diameter entrance for minimum turbulence and maximum efficiency
• Single row roller bearings for increased bearing life
• Easy accessible front access drain
• Reduced high bearing load
Mission XP Blender Pump Parts List:
|
Mission Type Magnum XP Parts List |
||||||||||
|
Item # |
Description |
Qty. |
Base Part Number |
Processing Number |
|
Item # |
Description |
Qty. |
Base Part Number |
Processing Number |
|
1 |
1 |
24022-01-30A |
651120206 |
|
25 |
Bearing, Outboard (14X12 ) |
1 |
20616-2 |
658413307 |
|
|
|
Casing, 12x10x23 |
|
25008-01-30A |
662001001 |
|
|
Bearing, Outboard (12X10 & 8X6) |
2 |
|
661009001 |
|
|
Casing, 8x6x18 |
|
25289-02-30A |
662002089 |
|
26 |
Seal, Bearing Cover |
1 |
7496-267 |
658408802 |
|
2 |
Nut, Casing |
32 |
3932-61 |
648402014 |
|
27 |
Lock Washer |
1 |
Jun-24 |
658407002 |
|
3 |
Stud, Casing (14X12 & 12X10) |
32 |
3862-86 |
658403308 |
|
28 |
Lock Nut, Bearing |
1 |
Jun-23 |
658406509 |
|
|
Stud, Casing (8X6) |
16 |
3862-90 |
601208285 |
|
29 |
Oil Seal, Bearing Cover |
2 |
20619-04 |
658413638 |
|
|
Stud, Casing (8X6) |
16 |
3862-92 |
648401118 |
|
30 |
Drive Screws |
6 |
12530 |
601482417 |
|
4 |
Gasket, Casing (14x12x22) |
2 |
10399-55-01 |
658410501 |
|
31 |
Nameplate |
1 |
23017 |
601501505 |
|
|
Gasket, Casing (12x10x23) |
|
25012-01-01 |
661010001 |
|
32 |
Shaft |
1 |
24028-33 |
656420007 |
|
|
Gasket, Casing (8x6x18) |
|
25012-02-05 |
662010032 |
|
33 |
Key, Coupling |
1 |
4372-30-21 |
658405055 |
|
5 |
Cover, Front (14x12x22) |
1 |
24021-01-30 |
654310309 |
|
34 |
Cover, Bearing O.B. |
1 |
24033-01-01 |
654314004 |
|
|
Cover, Front (12x10x23) |
|
25009-01-30 |
662014003 |
|
35 |
Bolts, Bearing Cover |
2 |
3861-139 |
648401081 |
|
|
Cover, Front (8x6x18) |
|
25291-02-30 |
662014129 |
|
36 |
Washer, Bearing Cover |
2 |
3936-19-L8 |
648402030 |
|
6 |
Impeller, 14x12 Clockwise Rot. 22” |
1 |
24024-X0-HS |
662005003 |
|
37 |
Nuts, Bearing Housing |
2 |
3932-62 |
658404702 |
|
|
Impeller, 12x10 Clockwise Rot. 23” |
|
25010-Y0-30 |
662005002 |
|
38 |
Bolt, Bearing Housing |
4 |
3861-138 |
648401057 |
|
|
Impeller, 8x6 Clockwise Rot. 18” |
|
25292-T0-30 |
662005018 |
|
39 |
Washer, Flat |
2 |
3936-19-L8 |
648402030 |
|
7 |
Seal, Impeller Nose |
1 |
7496-158 |
658408109 |
|
40 |
Bolt, Packing Gland |
2 |
3861-165 |
601408289 |
|
8 |
Key, Impeller |
1 |
4372-29-21 |
658405006 |
|
41 |
Gland, Packing Half |
2 |
24034-01-13 |
654315100 |
|
9 |
Nose, Impeller ( Hex Design) |
1 |
24025-04-25L |
652309601 |
|
42 |
Packing Set |
1 |
8264-344-K |
658409503 |
|
|
Nose, Impeller (Two Flat Design) |
|
24025-01-25L |
652309600 |
|
43 |
Screw, Cap |
2 |
3909-04-87 |
658404207 |
|
|
Nose, Impeller (2 Flat Ion Nitride) |
|
24025-03-25L |
662014054 |
|
44 |
Plug, Grease |
1 |
Jan-05 |
601474695 |
|
10 |
Screw, Set |
1 |
14430-19 |
658411400 |
|
45 |
Breather |
1 |
Jan-67 |
601473689 |
Added to subscribe successful !
