11 inch Impeller 19121-70-30 is used for 6x5x11 Mission Magnum Centrifugal Sand Pumps.
Tobee® provides 19121-xx-30 impellers for Mission Magnum centrifugal pump 6x5x14:
19121-70-30 Impeller 6 x 5 – 11 inch
19121-80-30 Impeller 6 x 5 – 12 inch
19121-90-30 Impeller 6 x 5 – 13 inch
19121-A0-30 Impeller 6 x 5 – 14 inch
Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings.
Part size cast into the impeller. This makes part identification easier.
Impeller gasket in included with impeller
All impellers are dynamically balanced
Offered Hard iron and other materials upon request
All impellers are investment casted or resin-casted with pickling (acid washing) as our power-end parts, which are also available in cast steel in favor of ductile. All other sizes are resin-casted with pickling (acid washing) to ensure smooth surface finish. To ensure quality, we meticulously check threaded holes by fitting their bolts to ensure the threads are clean and clear. All casings are of course pressure tested and all impellers and dynamic balanced. Each casing is properly pressure tested prior to shipping.
Our impellers are comparable to famous pump brands such as Mission Magnum®.
Mission Magnum I Pump Parts List:
Item | Qty | Part No. | Processing# | Description | Material |
1* | 1 | See below | See below | Casing | Hard iron |
1A | 1 | 10399-46-1 | 648403012 | Gasket,casing | Vellumoid |
1B | 12 | 3932-61 | 648402014 | Nut,casing | Stl |
1C | 12 | 3862-76 | 648401115 | Stud,casing | Stl |
1D | 1 | 8505-04-01 | 86485503 | Plug,Casing Drain | Stl |
1E | 1 | 8505-04-01 | 646400507 | Plug,flush line | Stl |
2* | 1 | See below | See below | Impeller | Hard iron |
2A | 1 | 64845082 | Seal,impeller | Viton | |
2B | 1 |
| Washer,impeller | Stl | |
2C | 1 |
| Bolt,impeller lock | Stl | |
3*# | 1 | 22223-01-30 | 641116157 | Stuffing box,mech.seal | Hard iron |
3*& | 1 | 20614-01-30 | 643365042 | Stuffing box,packed | Hard iron |
3A | 2 | 3861-117 | 648401016 | Bolt,stuffing box | Stl |
3B | 1 | 19368-01 | 601499403 | Grease fitting | Brass |
4 | 1 | 641103338 | Gland assy,packing | Stl 304 | |
5A# | 1 | 648414308 | Seal,mechanical | Tungsten | |
5A~ | 3 | 25014-04M-B | 661007005 | Packing, Shaft | Kevlar |
6 | 2 | B3701A | 601102494 | Bolt assy,gland | Stl 304 |
7 | 1 | 646490557 | Shaft | 42CrMo | |
7A# | 1 | 20943-21 | 641102182 | Sleeve,shaft,M.S. | 38CrMoAl |
7A& | 1 | 20613-21G-7A | 641102181 | Sleeve,shaft,Pack | Stl |
7B | 1 | 4372-5-21 | 601212392 | Key,shaft | Stl |
7C | 1 | 23444-01-72 | 648415156 | Seal,shaft sleeve | Viton |
8 | 1 | 641116108 | Deflector assembly | Composite | |
9 | 1 | 20618-12-1 | 644302499 | Frame,grease lubricated | Cast iron |
9A | 1 | 8505-05 | 601474737 | Plug,oil drain | Iron |
9B | 3 | 2538-1H | 648403608 | Plug,oil fil | Iron |
9C | 1 | 8505-05 | 601474737 | Plug, Frame Drain | Iron |
9D | 1 | 8267-01 | 601473689 | Breather | Stl |
9E | 1 | 8478-3 | 601174584 | Oiler Assembly |
|
9F | 1 | A 662014131 | 662014131 | Dip Stick | Stl |
9G | 3 | 2538-1H |
| Bolt, Casing Jack | Stl |
10A | 1 | 20626 | 644303109 | Cover,inboard bearing | Iron |
10B | 1 | 20625 | 648408706 | Gasket,I.B.Brg.Cover | Vegetable fiber |
10C | 1 | 20619-01 | 648408300 | Oil seal, I.B.Brg.Cover | Buna-n |
10D | 2 | 3861-1 | 601407505 | Bolt, I.B.Brg.Cover | Stl |
10E | 2 | 3932-2 | 601408560 | Nut, I.B.Brg.Cover | Stl |
10F | 1 | 20620-01 | 648408409 | Exclusion Seal, I.B. Brg. Cvr. | Buna-n |
10G | 1 | 21641-01 | 661010033 | Grease Fitting | Stl |
10H | 1 |
| 648411908 | Grease Fitting | Stl |
11 | 1 | 20615-1 | 661009010 | Bearing,inboard | Vendor |
12 | 1 | 20624-01-01 | 644308504 | Housing,O.B.bearing | Iron |
12A | 1 | 7496-253 | 648402295 | Seal, O.B.Brg.housing | Buna-n |
12B | 4 | 3861-138 | 648401057 | Bolts, O.B.Brg.housing | Stl |
12C | 2 | 3932-62 | 658404702 | Nut, O.B.Brg.housing jam | Stl |
13 | 1 | 20617-01-01 | 641103296 | Cover,O.B.Bearing | Iron |
13A | 1 | 19368-01 | 661010020 | Grease zerk, O.B.Brg.Cover | Stl |
13B | 1 | 7496-26 | 72200017 | O-ring, O.B.Brg.Cover | Buna-n |
13C | 1 | 20619-02 | 648408359 | Oil seal, O.B.Brg.Cover | Buna-n |
13D | 2 | 3861-139 | 648401081 | Bolt, O.B.Brg.Cover | Stl |
14 | 2 | 20616-1 | 648408201s | Bearing, O.B. | Vendor |
14A | 1 | 6124-4 | 648402105 | Lockwasher,O.B.Bearing | Stl |
14B | 1 | 6123-4 | 648402055 | Locknut, O.B.Bearing | Stl |
CASINGS ( including studs, nuts and gaskets) | |||||
Item | Qty | Part No. | Processing# | Description | Material |
1* | 1 | 19203-01-30A | 641101753 | Casing,3×2×13 | Hard iron |
1* | 1 | 19205-01-30A | 641101902 | Casing,4×3×13 | Hard iron |
1* | 1 | 19222-01-30A | 641102058 | Casing,5×4×14 | Hard iron |
1* | 1 | 641101456 | Casing,6×5×11 | Hard iron | |
1* | 1 | 19123-01-30A | 641101605 | Casing, 6×5×14 | Hard iron |
1* | 1 | 19763-01-30A | 641102157 | Casing, 8×6×11 | Hard iron |
1* | 1 | 19763-01-30A | 641101308 | Casing,8×6×14 | Hard iron |
1* | 1 | 20937-01-30A | 641102322 | Casing,10×8×14 | Hard iron |
IMPELLERS | |||||
Item | Qty | Part No. | Processing# | Description | Material |
2* | 1 | 19204-XX-30 | 641215603 | Impeller,3×2×13 | Hard iron |
2* | 1 | 641217005 | Impeller,4×3×13 | Hard iron | |
2* | 1 | 19224--XX-30 | 641217831 | Impeller,5×4×14 | Hard iron |
2* | 1 | 641211602 | Impeller,6×5×11 | Hard iron | |
2* | 1 | 641212105 | Impeller, 6×5×14 | Hard iron | |
2* | 1 | 641211602 | Impeller, 8×6×11 | Hard iron | |
2* | 1 | 19116-XX-30 | 641209903 | Impeller,8×6×14 | Hard iron |
2* | 1 | 21867-XX-30 |
| Impeller,10×8×14 | Hard iron |
Added to subscribe successful !
