150SV-SP Vertical Slurry Pump is available in a wide range of popular sizes to suit most pumping applications. Thousands of these pumps are proving their reliability and efficiency worldwide in Minerals processing, Coal preparation, Chemical processing, Effluent handling, Sand and gravel and almost every other tank, pit or hole-in-the ground slurry handling situation.
Tobee® SP(R) Vertical Slurry Pump Performance Parameter:
|
Model |
Matching power P (KW) |
Capacity Q (m³/h) |
Head H (m) |
Speed n (r/min) |
Eff.η (%) |
Impeller dia. (mm) |
Max.particles (mm) |
Weight (kg) |
|
40PV-SP |
1.1-15 |
7.2-29 |
4-28.5 |
1000-2200 |
40 |
188 |
12 |
300 |
|
65QV-SP |
3-30 |
18-113 |
5-31.5 |
700-1500 |
60 |
280 |
15 |
500 |
|
100RV-SP |
5.5-75 |
40-289 |
5-36 |
500-1200 |
62 |
370 |
32 |
920 |
|
11-110 |
108-576 |
8.5-40 |
500-1000 |
52 |
450 |
45 |
1737 |
|
|
15-110 |
180-890 |
6.5-37 |
400-850 |
64 |
520 |
65 |
2800 |
|
|
250TV-SP |
18.5-200 |
261-1089 |
7-33.5 |
400-750 |
60 |
575 |
65 |
3700 |
|
300TV-SP |
22--200 |
288-1267 |
6-33 |
350-700 |
50 |
610 |
65 |
3940 |
Design features:
• Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require.
• Impellers - Unique double suction impellers; fluid flow enters the top as well as the bottom. This design eliminates shaft seals and reduces thrust load on the bearings.
• Large Particle - Large particle impellers are also available and enable passing unusually large solids.
• Bearing Assembly - The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft.
• Casing - The metal pumps have a heavy walled abrasive resistant Cr27Mo chrome alloy casing. Rubber pumps have a molded rubber casing adhered to sturdy metal structures.
• Column and Discharge Pipe - The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered.
• Upper Strainers - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump.
• Lower Strainers - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
150 SV-SP Vertical Sump Pump Spare Parts List:
|
No. |
Pump Model |
Part Name |
Basic Part No. |
Part Code |
Material |
|
1 |
150SV-SP |
Bearing Housing |
004 |
SV004-1 |
Ductile |
|
2 |
150SV-SP |
Bearing Sleeve |
008 |
SV008 |
- |
|
3 |
150SV-SP |
Bearing |
009 |
S009 |
SKF/Timken |
|
4 |
150SV-SP |
Bearing |
009D |
S009D-1 |
SKF/Timken |
|
5 |
150SV-SP |
Mounting Plate |
019 |
SV15019 |
Steel |
|
6 |
150SV-SP |
End Cover |
024 |
SV024 |
Ductile |
|
7 |
150SV-SP |
Low End Cover |
024L |
SV024L-1 |
Steel |
|
8 |
150SV-SP |
Key |
- |
SV070 |
Steel |
|
9 |
150SV-SP |
Washer |
- |
105 |
Steel |
|
10 |
150SV-SP |
Shim Set |
025 |
SV025 |
- |
|
11 |
150SV-SP |
Nipple |
- |
M10X1 |
Steel |
|
12 |
150SV-SP |
Name Plate |
- |
- |
- |
|
13 |
150SV-SP |
Rivet |
- |
- |
Steel |
|
14 |
150SV-SP |
Back Liner |
041 |
SP15041 |
Chrome alloy |
|
15 |
150SV-SP |
Suction Joint |
060 |
SP15060 |
- |
|
16 |
150SV-SP |
Lock Nut |
061 |
SV061 |
Steel |
|
17 |
150SV-SP |
Labyrinth |
062 |
SV062 |
Steel |
|
18 |
150SV-SP |
Nipple 45 |
- |
M10X1 |
Steel |
|
19 |
150SV-SP |
O Ring |
064 |
SV064 |
Ductile |
|
20 |
150SV-SP |
Shaft |
073 |
SV15073 |
Steel |
|
21 |
150SV-SP |
Shaft Sleeve Ejector |
077 |
- |
|
|
22 |
150SV-SP |
Bearing Seal |
089 |
SV089 |
- |
|
23 |
150SV-SP |
Casing |
092 |
SP15092 |
Chrome alloy |
|
24 |
150SV-SP |
Column |
102 |
SV15102 |
- |
|
25 |
150SV-SP |
Piston Ring |
108 |
S108 |
Steel |
|
26 |
150SV-SP |
End Cover Set Screw |
- |
S027M-1 |
Steel |
|
27 |
150SV-SP |
Strainer |
116 |
SP15116-1 |
- |
|
28 |
150SV-SP |
Lower Strainer |
116L |
SP15116L |
D21 |
|
29 |
150SV-SP |
Casing Seal |
124 |
DH2125 |
- |
|
30 |
150SV-SP |
Discharge Pipe |
154 |
SV15154 |
- |
|
31 |
150SV-SP |
Flinger |
184 |
SV184-1 |
- |
|
32 |
150SV-SP |
Discharge Pipe Gasket |
204 |
SP15204 |
- |
|
33 |
150SV-SP |
Impeller |
206 |
SP15206 |
Chrome alloy |
|
34 |
150SV-SP |
O Ring |
217 |
SV217 |
Steel |
|
35 |
150SV-SP |
Spacer Set |
290 |
SV290 |
- |
|
36 |
150SV-SP |
Suction Pipe |
322 |
SP15322 |
- |
Added to subscribe successful !
