Tobee's 14x12 AH Slurry Pump Volute Liners G12110 can made from A05, A61, A07, A33, A51, etc
Slurry Pump Volute Liner G12110 is an important wear part of 14x12 AH Slurry Pumps. It forms a slurry pump chamber with G12083 throat bush and G12041 frame plate liner insert where the slurry would flow through them. Slurry volute Liner is a curved funnel increasing in area to the discharge port. It is often used with slurry pump impeller. As the area of the cross-section increases, the volute reduces the speed of the liquids and increases the pressure of the liquids. The main purposes of a volute liner is to help balance the hydraulic pressure on the shaft of the slurry pump.
Tobee® slurry pump parts are dimensionally interchangeable with warman slurry pump parts and other brand slurry pumps. And more, we accept pump parts OEM and ODM business, especially abrasion and corrosion pump parts. Tobee own foundry and compound specialist to increase the wet parts wear life time, and We have been tested by end users plant of the most abrasive and most corrosive arduously applications. and also welcome the opportunity to discuss your applications in more detail. Our experienced technical engineers are always ready to give advice and make suggestions to improve future wear life of your slurry pumps. We are capable enough to help you work out a perfect casting material ingredient for special slurries.
Slurry Pump Volute Liner Codes:
|
Volute Liner Code |
AH Slurry Pump |
Volute Liner Metal Materials |
|
B1110 |
1.5/1B-AH |
A05, A05A, A61, A07, A49, A33, etc |
|
2/1.5B-AH |
A05, A05A, A61, A07, A49, A33, etc |
|
|
C2110 |
3/2C-AH |
A05, A05A, A61, A07, A49, A33, etc |
|
4/3C-AH, 4/3D-AH |
A05, A05A, A61, A07, A49, A33, etc |
|
|
6/4D-AH, 6/4E-AH |
A05, A05A, A61, A07, A49, A33, etc |
|
|
6/4E-AHP |
A05, A05A, A61, A07, A49, A33, etc |
|
|
8/6E-AH, 8/6F-AH |
A05, A05A, A61, A07, A49, A33, etc |
|
|
10/8F-AH, 10/8ST-AH |
A05, A05A, A61, A07, A49, A33, etc |
|
|
12/10F-AH, 12/10ST-AH |
A05, A05A, A61, A07, A49, A33, etc |
|
|
14/12F-AH, 14/12ST-AH |
A05, A05A, A61, A07, A49, A33, etc |
|
|
H14110 |
16/14TU-AH |
A05, A05A, A61, A07, A49, A33, etc |
|
Volute Liner Code |
HH Slurry Pump |
Volute Liner Metal Materials |
|
CH1110 |
1.5/1C-HH |
A05, A05A, A61, A07, A49, A33, etc |
|
3/2D-HH |
A05, A05A, A61, A07, A49, A33, etc |
|
|
EH3110 |
4/3E-HH |
A05, A05A, A61, A07, A49, A33, etc |
|
FH4110 |
6/4F-HH |
A05, A05A, A61, A07, A49, A33, etc |
|
FH4110 |
6-H |
A05, A05A, A61, A07, A49, A33, etc |
|
Volute Liner Code |
M Slurry Pump |
Volute Liner Metal Materials |
|
F8110 |
10/8E-M, 10/8F-M,10/8R-M |
A05, A05A, A61, A07, A49, A33, etc |
|
F10110 |
12/10E-M, 12/10F-M |
A05, A05A, A61, A07, A49, A33, etc |
|
Volute Liner Code |
L Slurry Pump |
Volute Liner Metal Materials |
|
AL2110 |
20A-L |
A05, A05A, A61, A07, A49, A33, etc |
|
BL5110 |
50B-L |
A05, A05A, A61, A07, A49, A33, etc |
|
CL75110 |
75C-L |
A05, A05A, A61, A07, A49, A33, etc |
|
DL10110 |
100D-L |
A05, A05A, A61, A07, A49, A33, etc |
|
EL15110 |
150E-L |
A05, A05A, A61, A07, A49, A33, etc |
|
SL20110 |
200E-L |
A05, A05A, A61, A07, A49, A33, etc |
|
SL30110 |
300S-L |
A05, A05A, A61, A07, A49, A33, etc |
|
SL35110 |
350S-L |
A05, A05A, A61, A07, A49, A33, etc |
|
TL40110 |
400ST-L |
A05, A05A, A61, A07, A49, A33, etc |
|
TL45110 |
450ST-L |
A05, A05A, A61, A07, A49, A33, etc |
|
UL55110 |
550TU-L |
A05, A05A, A61, A07, A49, A33, etc |
14/12 AH Slurry Pumps Applications:
The 14/12 AH Slurry Pumps are widely used to transport high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones, lime and etc. in the industries of metallurgy, mining, coal, power, building material and etc. The temperature of the pumped solid-liquid mixture should be ≤80℃, and the weight concentration should be ≤60.
Added to subscribe successful !
