14inch 19224-A0-30 Impeller for Mission Magnum 5x4x14 Centrifugal Pump

Sandman™ Hard Iron Impeller 19224-A0-30 641217831 for Mission Magnum I 5x4x14 Centrifugal Sand Pump.

Sandman™ 19224-A0-30 impellers Diameter can be cut:

19224-70-30 Impeller 5×4-11 inch
19224-74-30 Impeller 5×4-11.5 inch
19224-80-30 Impeller 5×4-12 inch
19224-84-30 Impeller 5×4-12.5 inch
19224-90-30 Impeller 5×4-13 inch
19224-94-30 Impeller 5×4-13.5 inch
19224-A0-30 Impeller 5×4-14 inch

The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome™, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.

Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings.  Part size cast into the impeller. This makes part identification easier. Impeller gasket in included with impeller All impellers are dynamically balanced Offered Hard iron and other materials upon request  All impellers are investment casted or resin-casted with pickling (acid washing) as our power-end parts, which are also available in cast steel in favor of ductile. All other sizes are resin-casted with pickling (acid washing) to ensure smooth surface finish. To ensure quality, we meticulously check threaded holes by fitting their bolts to ensure the threads are clean and clear. All casings are of course pressure tested and all impellers and dynamic balanced. Each casing is properly pressure tested prior to shipping.

Typical Configurations:  

 3x2x13       6x5x14
4x3x13       8x6x11
5x4x14       8x6x14
6x5x11       10x8x14

Typical Applications:  

• Mud pumping – offshore/onshore 

• Solids control 

• Dredging 

• Leveling or Rig Platform (ballast) 

• Barite, ferric oxide, and mineral oil 

• Base drilling muds 

• Glass fibers 

• Sugar processing 

• Ash or coal conveyers 

• Cement