Tobee Impeller FAM8147R55 is one of the most important parts of 10x8 AH Slurry Pump. Centrifugal Pumps need impeller to produce the centrifugal force which transfer the slurries. The centrifugal force is produced by the impeller which rotates to certain speed. When impeller is rotating, the slurry pump could meet the requirements of the equipment. However, it is a component, which is worn out very easily. Therefore, for long service life of the impeller, the material plays an important role here. Tobee pump offers the two solutions for this problem. We choose the white iron, high chrome (27%) for the strong abrasive slurries, also with the sharp particles. For the corrosive slurries with blunt particles, we recommend the natural rubber.
Tobee® Rubber Materials Type Descriptions:
|
Tobee® code |
Material name |
Type |
Description |
|
RU08 |
Standard Impeller Rubber |
Natural Rubber |
RU08 is a black natural rubber, of low to medium hardness. R08 is used for impellers where superior erosive resistance is required in fine particle slurries. The hardness of RU08 makes it more resistant to both chunking wear and dilation (i.e.: expansion caused by centrifugal forces) as compared to RU26. RU08 is generally only used for impellers. |
|
RU26 |
Anti Thermal Breakdown Rubber |
Natural Rubber |
RU26 is a black, soft natural rubber. It has superior erosion resistance to all other materials in fine particle slurry applications. The antioxidants and antidegradents used in RU26 have been optimized to improve storage life and reduce degradation during use. The high erosion resistance of RU26 is provided by the combination of its high resilience, high tensile strength and low Shore hardness. |
|
RU33 |
Natural Rubber (Soft) |
Natural Rubber |
RU33 is a premium grade black natural rubber of low hardness and is used for cyclone and pump liners and impellers where its superior physical properties give increased cut resistance to hard, sharp slurries. |
|
RU55 |
Anti Thermal Natural Rubber |
Natural Rubber |
RU55 is a black, Anti-corrosive natural rubber. It has superior erosion resistance to all other materials in fine particle slurry applications. |
|
SY01 |
EPDM Rubber |
Synthetic Elastomer |
|
|
SY12 |
Nitrile Rubber |
Synthetic Elastomer |
Elastomer SY12 is a synthetic rubber which is generally used in applications involving fats, oils and waxes. S12 has moderate erosion resistance. |
|
SY31 |
Chlorosulfonated Polyethylene (Hypalon) |
Synthetic Elastomer |
SY31 is an oxidation and heat resistant elastomer. It has a good balance of chemical resistance to both acids and hydrocarbons. |
|
SY42 |
Polychloroprene (Neoprene) |
Synthetic Elastomer |
Polychloroprene (Neoprene) is a high strength synthetic elastomer with dynamic properties only slightly inferior to natural rubber. It is less effected by temperature than natural rubber, and has excellent weathering and ozone resistance. It also exhibits excellent oil resistance. |
|
SY45 |
High Temperature Hydrocarbon Resistant Rubber |
Synthetic Elastomer |
SY45 is an erosion resistant synthetic rubber with excellent chemical resistance to hydrocarbons at elevated temperatures. |
|
SY51 |
Fluoroelastomer (Viton) |
Synthetic Elastomer |
SN51 has exceptional resistance to oils and chemicals at elevated temperatures. Limited erosion resistance |
Added to subscribe successful !
